Purchacing LX450

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 18, 2008
Threads
5
Messages
29
Location
Hope Mills, NC
Hey guys, this is my intitial question on this forum or any for that matter. I'm looking at buying a 1997 LX-450. I'm pretty excited about it. Well I've found a wealth of information on this site (thank goodness). I'm still on the fence about it though. My question is this? Deciding between the LX or the LC. The guy selling the LX has taken exquisit car of the ride. I've driven LC's all over Africa and have had great fun driving through the Kalahari and through the Ogeden of Ethiopia. Though I won't be trashing about in this vehicle, I still want to have a little fun and still pull up to Ruth Chris's in style. I would also like to add things like a "Safari style" roof rack. As you can see I tend to ramble a bit, sometimes. Well any way. The thing that concerns me the most is the maintinence piece. Any kind of help will suffice. I have some shade tree experience, especially on Fords. Well anywho any info the experts can pass on will be helpful. Thanks African Cruiser
 
Deciding between an LX or an LC shouldn't be an issue. Other than a few items that are listed in the FAQ, they are the same truck. I buy all my parts from Toyota. The frame is stamped FZJ, the glass, rims, stickers and parts all say Toyota except for the few peices that don't matter much.

Go to the FAQ. Its the thread just below the announcements on the mainpage titled FAQ for 80/LX450 series and go to the section on thinking of buying. Look at the other sections as well to see what you can do with these.

If you want to see what you can do with a LX450, click the highlited text "ROTW" in my signature

At the end of the FAQ, there are ROTW write-ups on quite a few members.
 
If the LX is well taken care of, go for it. LC and LX are just basically the same truck with few minor adds on the LX. Just like Romer said read the FAQ.

Oh by the way, welcome to mud :flipoff2:
 
I have a 97 LX and it was VERY well taken care of, in comparision to other LCs in my area. "Lexus" is just a trim package. If I am not mistaken, all Lexus vehicles are also Toyota's in, either the U.S. or other countries.
 
Piece of crap

:mad: Well I looked at the LX-450 and the gentleman wasn't forthright w/ the description. So I didn't buy the LX. I'm looking at another LC. I hope to have better luck w/ this than the LX. I want to be sure that my wife digs the LC. She thinks that there isn't enough room and that the back seat (2nd row). I think it'll be fine. Wish me luck. AfricanCruiser:p
 
Welcome - nice 80s are getting hard to find. You should keep an eye on the VEHICLES / TRAILERS FOR SALE forum on this board, (use Forum Jump in the lower right) where you may find cruisers with a complete maintenance history, and if it's a mudders 80, you'll get fair and honest representation.
 
I would agree with mainemike on buying from the forum...Good ones are becoming harder to find and I would trust a mud members "description" more than some regular joe. Sorry about the LX and good luck on the journey. Itll be worth it in the end!
 
Hey guys!! I just puchased 97 Cruiser w/ 172000 miles, it also has Diff Locks. My only issue is w/ the check engine light. I took the "Earth Pig" down to AutoZone and hooked it up to the dio machine and guess what? The EGR is acting up. So that's something I'll have to fix already. I'll try it myself. The thing I've noticed is the pipe attaching to the EGR valve is in an akward position and just regular tools don't seem to get the job done. Is there a special tool to get the job done, or do I need to just upgrade my tool bag? Help Thanks
 
AfricanCruiser- the first thing you need to do is start a new thread with pics of your new truck so you can be properly welcomed, and congrats!!
 
Maint. stuff

Well this begins my journey. I have started to find things with Cruizer, as I was driving my ride home the check engine light came on and so started my problems. I took the LC to Autozone and ran the diagnostic and I was told the EGR valve code came up and so I bought and replaced the valve and gasket. Rick Hendrick Toyota in Fayetteville, NC installed the valve for $88.00. I thought this would solve the problem, WRONG, WRONG (habitual line stepper). :mad: The next day everything seemed okay then, I cranked up the truck and she started running like crap. I again went to Autozone and 9 codes came up. I again went back to Toyota w/ the codes in hand and I was running rich and lean and had them (Toyo) check all things and I have to replace the 02 sensor, of course, and the VSV. The cash is starting to add up and my wife (CSM) said " how much now". I also replace the Belts. This is starting to make me very frustrated. I wanted to buy a LC due to the low maint. I know certian things have to be done, its just gets old handing out cash every week to get something done. Does anyone know someone in Fayetteville that does good TOYO work?
OH by the by if you mention that the internet has the part cheaper on the Rick Hendrix Toyota parts Dept. they'll sell you the part at a cheaper rate i.e. EGR valve list $169 sold to me for $125. not bad now all my parts are being bought at the dealer at cost. O2 sensor for $104 instead of $125.00. PEACE :cool:
 
Well this begins my journey.

AC,
Start another thread and properly title the thread. You are throwing money at the truck and have wasted a lot of time and money so far. It will only get worse if you don't start a thread, succinctly describe your problems, and patiently read and digest the information you [likely] will be given.

You were already told the EGR valve is rarely the problem yet you bought one and had the dealer install it. That's not a good start here in the 80-Section.

-B-
 
Did you know each O2 sensor is held on by two nuts. Remove two nuts, pull out old sensor, disconnect sensor and install new?

You could do a lot of this yourself, but as folks are sayiong you need to start new threads on each topic.

Also, it's important to note that a lot of folks get rid of vehicles because they develop problems. Likely these were all there and they cleared the codes before you took it.

You now need to baseline the vehicle to get all the maintenance items up to snuff. They are low maintenance vehicles once the maintenance is up to date.
 
You now need to baseline the vehicle to get all the maintenance items up to snuff. They are low maintenance vehicles once the maintenance is up to date.

x2...plan to spend a fair amount of $$ "baselining" the 80 and then enjoy the ride. Are they perfect? No...But then again, how many other vehicles with the miles your 80 has on it now are even still on the road?

80s are generally low maintenance vehicles but as CDan points out in the thread linked above that sometimes the parts to fix the stuff that breaks is not cheap. The good news is that aside from fluids and brake pads, once you replace an item on your rig that may be 11+ years old and had 172K miles on it you will most likely never have to touch that part again :cool: :steer:
 
Please use the search function. Please read the FAQ's. Please research issues you are having before you start throwing money at them. You purchased a good vehicle, but you've got to do some baseline-type maintenance to get it up to "like new" condition. You're going to waste a lot of time, money, and fun with your truck if you don't make an investment up front in learning about your new vehicle. If you don't heed this advice, you'll probably never be happy with your purchase. It's an 11 year old vehicle. It will need work.
 
read the FAQ or at least skim it.

IT IS A MUST TO BASELINE THE TRUCK.

Yes this will cost some $ but at least you will know where you are with the vehicle.

And as others have mentioned start thread individual to each problem and we are more than willing to help.

LET ME STRESS AGAIN YOU REALLY NEED TO BASELINE THE TRUCK.
 
Back
Top Bottom