prototyping an 80 rear

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

lcwizard

Supporting Vendor
Supporting Vendor
Joined
Dec 5, 2004
Threads
88
Messages
5,414
Location
Miami, Arizona
Website
www.4plusproducts.com
We've been bouncing around an 80 rear for a while. Rather than feed five images at a time I set up a
FB page where we can add to an album..

We still have have a few final drawing changes and jigs to build but it's coming along. We decided to settle
on something that was more expedition oriented than pure rock crawl, which requires frame trimming.
We still remove the crossmember which in the 80 is far easier than the 60. We do this because we want a true class 4 hitch and the factory crossmember falls short of supporting that kind of load. I'll post some
powdered pics tomorrow or Monday of this version. As of now we have the construction shots online

4 Plus Products
 
I liked the ladder just below the bumper, on a 60 - looks like you have some interesting designs!
 
We'll be offering that option. I have it on my 60. I had one mounted in the typical position before, on top on the arm, but getting to that first step with an awkward load was a feat for a gymnast. I frequently wheel and load the roof rack myself so the first step had to get closer to the ground.
It also locks out at 90 degrees making a semi convenient shelf..... A smart ass friend suggested I put the porta-potty under it
 
Looks great. Have you looked into robotic welders? You can get a refurbished Fanuc, Nachi or ABB for 5 - 10 K. You could bang them out after you got the jig set up and programmed. I always like it when machines work for me.
 
Looks great. Have you looked into robotic welders? You can get a refurbished Fanuc, Nachi or ABB for 5 - 10 K. You could bang them out after you got the jig set up and programmed. I always like it when machines work for me.

That'd be nice but there's not a lot of "banging out" in the cruiser business anymore. I would guess one a week would be phenomenal sales for an
item like this. The 40 carrier is by far our greatest seller at about 1200 units in 18 years. The 60 rear while Man-a-Fre and the other Cruiser companies were doing well, before 2008, was outselling Kamar's at a rate of 20 to 1 when MAF was the sole distributor. At that rate our best year
was 44 units. When Rod from Kamar stayed here for a week to work on the FJ Cruiser we talked in depth about the businesses. When he took over the company from his dad they bought a couple robotics. He said they worked out well for certain parts and not so much for others. That was about 2006 when the world economy was cranking and he had distributors all over the world. they were producing about 25 rear "bars" a day.
A majority was not Cruisers. They built for every model and brand. After 07 sales plummeted here for them. MAF gave up the dealership. they tried holding on here until a year ago until they just pulled out of the US . Now Downey, Proffits, Solid Rock and a dozen or so small companies I used to sell to are gone, Man-a-Fre sold the business two weeks ago to BTB who is moving it to Nevada and 40s aren't being built for the trails like they used to. the 40 business has become a restoration market. 60s and 80s are around but everything for the 80 will cost more than the 60 because of
size. I think this 80 rear will outweigh the 60 rear by 40 lbs. It's not in my nature to shave weight at the expense of durability so I just have to see how it goes. I was fortunate enough to have gotten into the ground floor of cruiser parts. I feel for those just getting into it. When I started building for Man-a-fre in 1990, all the cruiser accessories on the market could be stuck in a 5 page catalog. By 2000 I had 125 items in the MAF catalog and they logged over 1 million in sales just in the 40 rear carrier alone. It was a shock what the bank crash did to the market. Literally overnight sales to MAF dropped from 25~28 thousand a month to less than 7....and it never recovered so Al decided it was time to sell
 
I hear you. My company went tits up in 2010. Thank god I still have my day job. It isn't easy being in business and you have to get work wherever you can find it. A good used robot might make the difference in making it as a one man shop compared to hiring a welder. I don't know what is like in AZ, but in CA it is cheaper to adopt someone than to hire them here.

The nice thing about robots is they never forget. Once you have it programmed and set up, you can bang it out once you get an order. That way you can diversify into more products for a wider range of vehicles.
 
I don't know what is like in AZ, but in CA it is cheaper to adopt someone than to hire them here.

That's how Man-a-Fre felt...it was time to sell and now it's moving to Nevada. I wonder if the CA. politicians will ever get a clue

The problem with too many choices is a place to inventory them. I don't want to become one of those bumper builders that delivers two or more months after you place an order. A friend of mine has a Tacoma that he bought a front and rear bumper from. Both companies have been around a long time and are very reputable but their wait in both cases was 7 months.

The only solution is what ARB did and move everything to a country that has a .50c per hour wage. ...I saw recently Vietnam was about 38 cents.
Now China is outsourcing to them to save costs Their people are wanting almost twice that now.
The cost of labor here averages 38% of a companies gross . Over there it's 3~5%
 
Love the bumper, looking forward to when they are available. I especially like the corners and sides. Will it be offered without swingouts? I had a Kaymar and having to undo the tire swingout got old. And I didn't even use it that much. Now with CY, I use the back all the time so a swingout is definitely not what I want.
 
Very nice!
 
I like this a lot. Same goes for without swing out. Would be interested in pricing both ways. The swing out interests me if I had the capability of removing it for around town driving and putting it on when I go. As it stands now I don't even carry a spare when I am driving around town. I live in a town that is 7 miles long and 5 miles wide. It takes 10 minutes to get anywhere I go. If I get a flat I can walk or call AAA.
 
I was thinking that with a CNC plasma table and a robotic welder and a series of different jigs you wouldn't need to inventory anything except for the basic materials. When an order comes in, you cut it weld it and ship it. It all depends on how finished you want to sell it, but that could be optional. Generally robots make very nice cosmetically pretty welds, so you may not have to grind them. You would want to compete in markets where you can get enough business, and maybe that isn't Landcruisers any more.

I was thinking it would be like the muffler shops that have a robot mandrel bender. They don't stock any specific pipes any more; just tube. When a car comes in they bend it up and install it.
 
The swing out interests me if I had the capability of removing it for around town driving and putting it on when I go.

Ooohhhh, yea! I like that idea a lot!!
 
@thatcabledude
it will take a few posts but here goes

IMG_5371.webp


IMG_5365.webp


IMG_5368.webp


IMG_5369.webp


IMG_5370.webp
 
Back
Top Bottom