Productive Christmas!

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

BELMONT148 said:
https://forum.ih8mud.com/showthread.php?t=70839

VTFJ40, here is a link on how I mounted them.

Jeremy

I've been investigating doing the same swap, but I didn't see any mention of moving spring hangers. I thought you had to flip the rear shackle hanger. I didn't think a couple inch over stock extended shackle would be enough to absorb the 3" longer spring and the normal flex.

I would think with the spring arched to fit in the smaller spring location this will cause problems down the road? Aside from the harsh ride, as it extends, the shackle will flatten out and bottom out on the rear frame.

Or, am I off my rocker on this?
 
I didn't create that arc in the springs, they were already like that.

The hanger may flatten out but as long as it does not hit the frame and prevent flex I think it will be ok.

Like I said earlier, if this set up is a problem I will move the hanger as needed. The ride would not be harsh, it is pretty soft when I put weight on the rear.
 
Back
Top Bottom