Power Steering Issue.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 1, 2014
Threads
18
Messages
158
Location
Winona, Mississippi
I have a 97 LX 450 with 160,000. The steering “all of a sudden” became difficult to turn. The problem being worse at slow speeds/low RPMs. The steering shuddered or vibrated at very low RPMs.

I Read several threads concerning similar problem, but none of them seem to provide a solution.

Replaced power steering pump, high and lower pressure lines. This did not fix the issue.

Replaced steering box with rebuild box – 3 times. This did not fix the issue.

The shop working on the truck talked with “engineers” in Texas. This did not fix the issue.

We are out of ideas and at a standstill.

Can anyone help?
 
Update: the Toyota service manager called engineers in Texas. They said nothing about torquing the balancer.

This morning the shop torqued the balancer and SHAZAM, the wheel can now be turned with a finger. "Damnedest thing I've ever seen!" Was service manager's comment. And' " would not have believed it if I had not seen it with my own eyes."

Thanks Toys R Us.
 
Holy Crap!!!

I just spent the better part of the day troubleshooting a customers lx450. Complained of no power steering after previous mechanic fixed oil leak at oil pump housing. I tested pressures and flushed the system and removed the old pump and made sure the gears were lined up and everything. I was this close to changing the ps pump even though I was highly suspect that it would catastrophically fail right when the last guy was in there. This one passing comment on this thread just saved my ass. I checked the bolt for the harmonic balancer and it was very loose. I threaded it in at least 5 or 6 complete revolutions before I could torque it as high as my wrench would do (250 lb-ft btw)
 
So I've been having problems with my power steering for quite a while. Every part has been replaced but there is still a leak. I was wondering if tightening up the bolt would not only fix it but stop the leak or if there is anywhere it might be leaking from that I'm missing.
 
Something else for me to check out... I've had a little bit of this issue - really heavy steering effort when I first start the truck, but it seems to improve once I get going.

Once again - the collected knowledge here is amazing - I think tech on IH8MUD is handier than the FSM!
 
Have you checked the torque on the front pulley/harmonic balancer? IIRC, 304ft/lb.

Update: the Toyota service manager called engineers in Texas. They said nothing about torquing the balancer.

This morning the shop torqued the balancer and SHAZAM, the wheel can now be turned with a finger. "Damnedest thing I've ever seen!" Was service manager's comment. And' " would not have believed it if I had not seen it with my own eyes."

Thanks Toys R Us.

Tools Rules!
 
Back
Top Bottom