Passenger Front Window & Passenger Rear Driver Window...HELP!

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 7, 2015
Threads
25
Messages
107
So I am ready to tackle this now. The (2) mentioned windows wont go down. No noise or anything when I press the driver master switch, or when I press the switch on the door panels themselves.

I made sure the master lock switch was in the "on" position. :)

Where do I start here? I guess if I was to hear a noise when pressing the button I would think regulator, but as stated I get no noise. At least there not stuck in the down position :)

The other 2 windows work just fine, a little slow but that for another day.

Thank you.
 
Thank you, i did see that post when I was searching, but since my 2 have never worked since I bought the 80 I thought someone may have a similar issue and how they resolved it.
 
They all go through your driver's switch. If it is disconnected, none of the others will work.
Pull the driver's switch and inspect the electrical connections at the plug, and look at the switch itself.
To pull the switch, pry up on the front edge of the switch panel. Then slide it forward. This is for a 96, so YMMV.

If it got rain or whatever in there, it may corrode, that would be a good place to start looking.

Or you could pull your door panels and just put 12V across your window motors with a couple pieces of wire.

There are no relays to "click". Have you tried just pulling down on the windows while you hit the down button? They might just be stuck shut.
 
They all go through your driver's switch. If it is disconnected, none of the others will work.
Pull the driver's switch and inspect the electrical connections at the plug, and look at the switch itself.
To pull the switch, pry up on the front edge of the switch panel. Then slide it forward. This is for a 96, so YMMV.

If it got rain or whatever in there, it may corrode, that would be a good place to start looking.

Or you could pull your door panels and just put 12V across your window motors with a couple pieces of wire.

There are no relays to "click". Have you tried just pulling down on the windows while you hit the down button? They might just be stuck shut.


This is exactly the info I am looking for. So thank you! I will check the driver side switch panel to ensure nothing is unplugged or loose. I will then have someone push the button wile I pull the window down. Thanks again for these tips! Very helpful!
 
OMG...thank God I read this post...I was having major issues with the passenger window...no power to the switch...no power anywhere, window related, I couldn't even get a hot to the window motor to make it go up...not happy with a window down in the winter and dreading taking it to the dealer...electrical is my weakness. Read this post and quickly discovered my window lock was locked and that was the entire issue...this after four hours of trying everything I could think of to get the window up. Thanks for posting this and bringing me to my senses...and for helping me save the embarrassment of taking it to the dealer with a non-issue. Not happy with myself, but happy I got the window up. I've been working on the drivers window, replaced the motor, siliconed my window guides, etc...it goes up down now, but still very slow on the way up. That's another issue...but thanks again for mentioning the window lock...I'm a dummy today...hopefully the remainder of 2016 will get better.
 
Back
Top Bottom