Pasrting out an '87 FJ60 in Fall City, WA

Joined
Sep 18, 2006
Messages
402
Location
Huntingtown, MD
Here is what I have:

- Body/frame: Damage to drivers front quarter, Silver paint, Glass is OK - both drivers side doors are good, rear passenger door good, hood is really good - 99% perfect, upper lift gate good, lower gate not so good , front passenger side light fixture, rear drivers side light fixture, dash frame, spare tire, front and rear axles (complete minus the Aisin hubs - see bleow), front bumper no good (rear bumper see below). Alloy wheels in real good shape (tires bald) ..I don't have time to take it apart (thought I would , but it's gotta go since the parents are coming soon with their camper, and this is in the way...) - $350 - come trailer it out. (does not steer due to lack of steering box,)

- 2F motor - Previous owner says it ran ok - but I would recommned using it for a rebuild project - Comp was 90 in #1 (added oil and it came up to 125ish), 2-5 good at 125, #6 higher at 150. Included are the block, int/ex manifolds (intake manifold looks new), head, valve cover, carb, starter, fuel pump, dizzy with new tune up parts (cap, rotor, wires, plugs). $275
It's still in the truck, so price includes me pulling it out , I'll negotiatie if you can pul it.

Truck & Motor - $475

Other parts:
- Alternator - $10
- Air Filter Assembly - $25
- Brown center console (real nice shape) - $25
- A/C comp - $25
- Carb cooling fan - $10
- Rear heater - $45 (plus all the plumbing)
- Tranny hump cover - $?
- Power steering pump - $30
- Smog pump - $30
- Another carb (from an '85 FJ60) - $50
- Aisin hubs (2) - $75
- Rear Bumper - 99% pefect (one very small dimple in the middle), missing the right end cap - $90
- Misc Emissions stuff - $?
- Misc electrical (wiring harness gone) - $?
- Water pump - $35 (looks prety new)
- Instrument cluster - $20
- After market coil with stock ignitor - $30
- Any other misc stuff - ?$

Call/email me for specifics and pictures

Marc - 405-664-9846
Fall City, WA
 
Joined
Jun 16, 2003
Messages
1,124
Location
Hull, Mass
I'd like to get the power steering pump and its bracketry.
How about the starter? Id like that as well.

Thanks
Rob
 
Joined
Apr 30, 2007
Messages
644
Location
Cody, Wyoming
How about the:

1. two outer round vents that have the "open/close" knob in the center
2. steering wheel
3. rear tail light lenses
4. Dash top (need dark brown)
5. Gear shift knob
6. rear bumper
7. window wash tank lid

Prolly think of more little things if you could check on these.

Thanks!
-WYO
 
Joined
Sep 18, 2006
Messages
402
Location
Huntingtown, MD
Centerlineseal - no txfr case, sorry

peterdouglas - sorry the seats are gone, grey anyway

wyomingben - pm sent

n2666s - pm sent
 
Joined
Sep 18, 2006
Messages
402
Location
Huntingtown, MD
Dave-T
Smog pump looks nice. What exactly is the valence? If you are talking about the "grille" then it is pretty good. I think I have another person interested in it - but will know today.

Marc
405-664-9846
 
Joined
Sep 18, 2006
Messages
402
Location
Huntingtown, MD
Nohokai -Shifters are gone. But I do have the tranny hump cover, pedal bucket (doesn't look too hard to take off I suppose) and the bell housing.

Cruiserhaven - the txfr case stuff is gone except for the boot - I have that.

Marc
405-664-9846
 
Joined
Sep 18, 2006
Messages
402
Location
Huntingtown, MD
Pictures for dave-t and clemson55

air pump:
_DSC2790.JPG

drive shaft:
DSCN2933.JPG
_DSC2790.JPG
DSCN2933.JPG
 

Users who are viewing this thread

Top Bottom