Parts...?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 5, 2015
Threads
32
Messages
87
Location
92677
Hello mud!

So I got a quick question just for some clarification. I'm planning on getting a LC soon and have heard it's hard and expensive to find basic parts for these 80 series. I havnt really read anything about this topic so wanted to get some opinion from some actual 80 owners out there.

My plan for my 80 is to have a offroad/semi-crawler/camping rig. So lots will be changed out and upgraded but want to know the difficulty of getting basic parts that go out and how costly?

Thanks!!
 
Not at all hard to get. We all have best experience with and push OEM parts, and, as with any quality manufacturer, they're not as cheap as some non-OEM parts might be. You may have seen on this forum that there are a number of sources that we use to obtain discounted OEM parts. Not much goes out on these rigs, brakes are in-line with other rigs, but in buying one the history of the head gasket would be one thing to look at with open eyes.
 
Land Cruiser parts are made out of gold. They are expensive and Toyota is very proud of them. Most OEM parts can be had in a few days. There are a lot of cheaper and more expensive after market parts available too.
 
They are not hard to get, but some parts are discontinued, so you might be forced to go used for something at some point. This seems to be more true for interior/trim/colored parts. There is a thread here that details discontinued parts.

Some parts you'll need to know where to look. Walk into NAPA and try to get a Birfield joint (BIRF) and they won't have a clue what you are talking about. Try calling it a C.V. joint and they'll try to look, but they just don't have it in their catalog.
 
Pretty much all the mission critical stuff is readily available dealer or aftermarket. Some of the little stuff (like interior trim bits, genuine body parts, etc) are getting harder to find. Unless you're trying to do a show car restoration, it shouldn't be an issue. You will need to get more parts online or at the dealer compared to other more common vehicles where NAPA, Advance, Vatozone keep stuff in stock. Not a problem, just requires a little more planning. Cost is notably higher compared to 4Runner parts (for example), in my experience.
 
Thanks everyone for the input!! I still love the 80 series and am getting one but just nice knowing what I'm getting into. I'm sure it's plenty do-able and I'll just cross the bridges as they come!
 
Back
Top Bottom