Parting out 1984 FJ 60

[D'Animal]

How about the pocket beside the center console? I need just the pocket not the whole console as long as all the tabs are still there.

The little drink holder looking thing with two compartments in it mounted under your right elbow?

I'll check this weekend.

 

[D'Animal]

Do you still have the upper liftgate (color/ rust)?

I still have it. The latch mechanism is going to Cruiser88. I will look for some pics.

 

[D'Animal]

I should have those. I'll check this weekend.

I'm looking for the glove box insert and a working flasher relay.

 

[earabadj]

Dan, I am after the hood
1_assist spring(coil like, not hinge) driver side and the
2_rear window wiper switch if you have an
3_original fog light switch or a nice one that goes on the far left by the driver's side, round hole,
I also would like to have it.

Please let me know how much. Shipping to Ontario Canada N1G 4S7 and not UPS, they charge $39 brokerage! Regular USPS is fine.

 

[D'Animal]

Dan, I am after the hood
1_assist spring(coil like, not hinge) driver side and the
2_rear window wiper switch if you have an
3_original fog light switch or a nice one that goes on the far left by the driver's side, round hole,
I also would like to have it.

Please let me know how much. Shipping to Ontario Canada N1G 4S7 and not UPS, they charge $39 brokerage! Regular USPS is fine.

I should have all of that.

How do I send a hood through the USPS?

 

[earabadj]

I should have all of that.

How do I send a hood through the USPS?

Just fold it in four (just kidding).
Sorry Dan, I meant the hood assist spring or helper spring, it has a spring coil, not the hood.

Cheers, Edgard.

 

[Dirtgypsy]

front spring hangers? just cut off the frame I can go from there.

clint

 

[jcbutcher]

I did not see any thing about the rims. If you still have them give me a price. thanks JCB

 

[D'Animal]

D'animal, have you broken it down far enough to get at frame parts yet. If so I would like to findout about the rear cross member. PM me with a price and shipping to 85201. Please....

It is broken down that far. I have a 40 sitting on it now.

 

[earabadj]

Dan, does that mean my parts are buried ?

Cheers, Edgard.

 

[D'Animal]

Dan, does that mean my parts are buried ?

Cheers, Edgard.

Crap! What parts did I promise you?

 

[D'Animal]

I will be diggin through all the stuff and packaging things up this long weekend.

I will be home a lone so I should get a ton of stuff done.

Everything will be ready to ship between x-mas and new years.

 

[earabadj]

Crap! What parts did I promise you?

Dan, no worries.
If you can, here are some of the parts that I would like to have;
The front windshield wipers or at least the plastic covers at the base(if not cracked).
The rear wiper arm if also clean.
The front wiper mechanism with the plastic bushings (I suspect, I have not taken mine apart but seems to act up, as in loose when at rest position!).
The hood assist spring driver side not hoot.
The switch for the rear windshield wiper
The switch for fog lights if can be fitted at the left side round hole by the driver side.
All the body mounts if they are clean, at least the two front ones under the rad support.
The rear 4Wheel drive emblem on the tail gate (if in nice shape).

I'm sure I can think of more but if you can find some of those it would be great.

Cheers, Edgard.

 

[D'Animal]

Gathering parts and boxing as the morning goes on.

 

[D'Animal]

I'll even send this out.

$5.00 sounds like not enough, but I'll take it! I'll be in Phoenix on the 20th for work, but could meet you where you are sometime on the 21st and pick it up from you. i leave for China on the morning of the 22nd. let me know. sorry for the slow response; I've been slammed and haven't had a chance to check the forums. my e-mail is mpanglin <at> hotmail <dot> com which is probably a better way to reach me.

Thanks.

 

[D'Animal]

I have most of this. "I'm tired of the other person trying to come up with the money."

Yep = drag link
Yep = relay rod assembly
yep = high & low pressure lines for PS pump
Yep = steering column
Nope = intermediate shaft w/ the u-joints.
Nope = PS pump left let me know what you want for it.
Nope = the starter if you still have that as well.

PM'd but let's do this too:
Looking for drag link & relay rod assembly, high & low pressure lines for PS pump, steering column & intermediate shaft w/ the u-joints. If you have a PS pump left let me know what you want for it. Lastly, the starter if you still have that as well.
Thanks.
Vic

 

[D'Animal]

Dan, do you have the passengers side front bumper cap?....shipping to Tuscaloosa, AL. 35406
Lou

How does $20.00 plus shipping sound?

also the sun screens for the driver and passenger along with the mounts if in good shape;

Lou

How does $35.00 plus shipping for the visors and all mounting hardware? (They are better than the ones in my 60)

 

[D'Animal]

Let me know if you still want it.

Dan, any update on the driver's seat?

Thanks,

Ray

 

[D'Animal]

Dan you got the interior fuse cover???

Yep.

 

[D'Animal]

Do you still have the upper liftgate (color/ rust)?

Brown.

It is pretty much the entire assembly as you see it.

$95.00 plus shipping from 93291.