Pardon me everybody

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 9, 2007
Threads
1
Messages
2
While I was driving on the highway yesterday somebody was chasing after me..really scary...
First I thought he was going to do something bad to me..I'm old but still can kick bud, but turned out to be he also nice gentleman introduced himself to me and told me about this website..very nice website , surprised and until now im still reading all the landcruiser 80 maintenance..very good here.

Actually the person told me about this website..he wants me to post my landcruiser photograph..its really nothing special, just 9 inch or (23 cm) lift up kit etc...let me shake my hand to each one of you here.
 
How do you post photograph here? Sorry i'm new and learning here. Ah finally, not great of it but at least be able to see.
Winch_80_22.webp
 
Last edited:
Welcome! So what size tires and gears? :D
 
Typically 35s or 33s are run with those ratios and I dont think 40s would get above 50 running those gears.

Capo, no way sould anyone run 33's with 4.88 or 5.29...the correct gears that would match stock gear to tire ratio is actually a 5.29 with a 39 or 40" tire (depending on the brand). With 5.29's and 38's I'm able to run on average at about 70/75mph on the freeway and even then my Rpms are a little high.
33's = stock or 4.56;
35/36's = 4.56 or 4.88's if you want more juice;
37/38's = 4.88 or 5.29s for the juice;
and 39+ 5.29's.
That's my opinion on the gearing you should have as per tire size.:beer:

Aussie, let me as a Q of you....at that ride height... do your springs bow? in other words when the truck is on flat ground and still are the spring perfectly straight up and down or do they have a slight bend to them? did you have to shim the mounts to compensate for the height/prevent bowing?
 
Aussie 80-NICE RIG!:cool:
 
welcome aboard :flipoff2:
 
Back
Top Bottom