paki soft top install ?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 4, 2004
Threads
52
Messages
208
Location
Ste Genevieve missouri
Has anyone installed the paki soft top onto a newer generation aqula alum tub? The tub I have is suppose to be made for a factory hardtop, just wanted to know before I try and buy one of the soft tops. Thanks
 
It will fit just fine

I put one onto a 1980 FJ40 Aquila 2nd gen. tub and had no trouble at all. You will have to modify (cut) the post that drop in the door striker area. But you would have to do that for a hard top. Also you have to to cut 2 big holes for the rear support. Hit me up with ?s when the time comes. You will also need those L braket that mount to the windshield frame( I have an extra set if you need them)
HTH
MJM
 
Last edited:
Thanks for the help. I think we are the only ones that have a alum tub and either have or want a paki soft top. Bill.
 
wantatlc said:
PM me if you want to sell that Confer/Blitz can carrier and mount off your spare tire :)

Still available from SOR, or recently was anyway. Check it out.







Paki top? Oh , right. I've heard of those:frown:
 
honk said:
Still available from SOR, or recently was anyway. Check it out.

yep, for about $50 too much :) and used will work just fine by me
 
Vortec_Cruiser said:
I've had one for a couple years now, and am very pleased with it. Did you have a bad experience with yours?

See your pm..
 
Back
Top Bottom