Overheat while engine is off

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

I've been keeping an eye on both gauges, it hasn't spiked in a while though. Still waiting.
Also, no bubbles in the coolant overflow. I'm guessing you conduct it when the engine is running, which I did.
 
What was the 'ole way to check the fan clutch, turn it and check something..?

No difinitive test for the fan clutch, but (and this has been repeated by me a gazillion times) they have a lifespan of around 100K miles. Replace it and move on.
 
No difinitive test for the fan clutch, but (and this has been repeated by me a gazillion times) they have a lifespan of around 100K miles. Replace it and move on.

IIRC at least one person pulled their black hub clutch fan and was able to retune it with higher weight oil just like the blue hub. It's worth a shot before going and dumping $$$ on a new one.

I'd also do a coolant flush and all the other normal PM (check belts, pulleys, replace tstat, check hoses, etc).

It'll be a lot of work, but get it out of the way before your posting on how to replace a head gasket, or looking to do an engine swap.
 
IIRC at least one person pulled their black hub clutch fan and was able to retune it with higher weight oil just like the blue hub. It's worth a shot before going and dumping $$$ on a new one.

Yes and no. Fan clutches can fail in a variety of different ways and given the age of the vehicle one must assume its original. So pull the clutch, separate the halves, clean out the old oil, replace with new, reinstall a 16 year old fan clutch with a 16 year old bearing to save a few dollars. This makes very little sense to me, but my time is worth a lot.
I would rather replace an unknown quantity with a new OEM part that I know will last for the next 100K miles and get on with my life.

It's a crucial part of the cooling system and needs to work correctly.
 
Jon, thanks for the tip. If you're ever in my parts we gotta talk. I'm going to look into the fan clutch, its gotta be part of it. 215k miles, so it could possibly be going.. Definitely a flush.

And more info on the problem: I turn car off, gauge is at normal level. Wait a period of time (like filling two 5 gallon tanks of diesel) then getting back into the car, starting it. When it starts it jumps up. (Before the start the gauge is at a normal level when the key is turned to on). Gas gauge remains constant. So something makes it spike when the engine starts up.
 
Times Square is a little longer than 30 minutes. My brother has an apartment in Stuyvestown, so if I go down there, I'll be sure to give you a message.
 
Electrical short?Look for two wires rubbing togeather. Id start at temp. sensing unit on the block.Could also be a wire grounding out.
 
Update:
After driving 5 straight hours on the highway following my parents Dodge Magnum (SO FAST), going 70 mph for the most part, we pulled into a gas station. I left the engine running and filled up. After filling up and getting back into the cruiser, it started to puff out blue smoke and overheated in the red. Oil was just changed and good, overflow full. We got back on the highway, and it returned to a normal level. Sounds like Fan Clutch, no?
 
Update:
After driving 5 straight hours on the highway following my parents Dodge Magnum (SO FAST), going 70 mph for the most part, we pulled into a gas station. I left the engine running and filled up. After filling up and getting back into the cruiser, it started to puff out blue smoke and overheated in the red. Oil was just changed and good, overflow full. We got back on the highway, and it returned to a normal level. Sounds like Fan Clutch, no?

If it's overheating when sitting, then it's not getting adequate cooling from the cooling system. When you're at speed the air cools the entire engine, not just the radiator (though that's where you get a lot of cooling).

Fan clutch would be where I would start, but you also need to check the radiator and pretty much everything in your cooling system.

Additionally, you could potentially be overheating at speed, and just not realize it due to the temp needle having the huge dead spot. Has the AC cut off on you (it'll cut off before the needle moves)?

If you're burning oil when overheating (blue smoke).....then I'd suspect a blown HG. Get a leak down tester (or go to a mechanic) and get it tested. It's not terribly expensive, but if you do have a blown HG then it changes your choices/options.

Driving it regularly when you're overheating is a "really bad idea."
 
91-92's don't have that feature, unfortunately; A/C will stay on right up into the red. :frown:

Curtis

:doh:


That's saved me once, when towing my dad's boat up a very steep (and long) hill. (My own fault, trying to pull it too fast.)


Hmm. There's a couple of threads about adding various temp sensors so you get a real accurate temp gauge. I would be loading up on those so I knew what was going on in the engine compartment. You can still do damage even if the needle doesn't move, if you're sitting right under the max temp of that dead spot for long periods of time....
 
Back
Top Bottom