OME vs FOX vs Bilstein

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 3, 2010
Threads
23
Messages
235
Location
stouffville, ontario
Hey Mud, I'm looking for some recommendations regarding shocks. If you had the chance, and the money spent was similar, which shocks would you get. we are comparing mono-tube shocks here, no remote reservoir. the FOX shocks are a bit more money, but not crazy.
 
what lift and what are you doing with the truck? i have OME and they suck, going to rancho when it is time to upgrade since they are great for the money.
 
i have the bilsteins with 2" ironman coils. fully loaded drawers in the back and the ride is nice. also tow a pop up camper quite a bit and the bilsteins hold up well with this application as well. mostly dirt and gravel roads with the occasional bumpy rocky road.
 
I had OEM and switched to FOX. The OEM were old and semi OK so obviously I felt the big difference

At any rate, if it hadn't been that I actually looked into the shock I could still be running semi-OK shocks. I was sold on the FOX because then can be rebuilt, so I am to rebuild them at a certain mileage just as PM and always have the peace of mind that I have good shocks.

In the long run you will save money
 
thanks for the input guys. the truck already has an OME suspension with approx. 2" of lift. the shock currently on it are white body with red boots, could be ranchos, whatever they are, they are shot. I bought it this way. it is an hdj81 that I'm currently converting to left hand drive, and will be a family camping rig, towing a small pop up and used for weekend adventures mostly fire roads and forest trails. I have OME nitro chargers on another truck, which I have no complaints with, just wanted to know from others what is out there. OME and Bilsteins will run me about $600, and Fox close to $800.
 
I have the OME Ls. The more weight I put on them the better they get.
Right to left hand drive conversation. You need to make a build thread for that.
 
I've taken a few pictures along the way, it's a slow process as I'm building a new garage and addition at the same time. aslo it's a complete resto/mod job down to the last nut and bolt. once it's up and running I'll post her up. would have been easier to do an engine swap, but I really wanted my VIN to start with HDJ81
 
It's not a build thread if it's finished. Start a thread so others can enjoy the jurney. It's not showing off, it's sharing.
 
I had the bilstiens and replaced them with fox 2.0's...comfort increased as well as smoothness of ride...the billies were stiff enough that I could have driven the truck without sway bars if I wanted to...not bad but not fox for sure...downside of fox is the need to be rebuilt...
 
decided to try the Billys, I already have OME's so I'll be able to compare. the idea of rebuilding Foxes seems kinda cool if you're into that. I know myself, and I won't do it. I will report back with update when up and running. I ended up getting an ARB bumper at the same time, so I'm trying to spread the wealth around a little.
 
i would look into the Icons. I have them on mine with OME coils. Granted, my old shocks were shot, but the Icons were like night and day. I believe they are valved for a fully armored rig, so not sure where you are on that front. They might be little stiff on a stock rig, IMO.
 
decided to try the Billys, I already have OME's so I'll be able to compare. the idea of rebuilding Foxes seems kinda cool if you're into that. I know myself, and I won't do it. I will report back with update when up and running. I ended up getting an ARB bumper at the same time, so I'm trying to spread the wealth around a little.
How are you liking your setup? I just bought my first 80 series ('94) and need new shocks and perhaps new springs (I have Ironman TOYO25B and TOYOT24B which are rated from 0-200kg). Looking at the Bilstein 5100 and Fox 2.0 Performance IPF. How have you liked your Bilsteins? Any recommendations?

I'll also mention I have an ARB bumper (no winch) and custom rear bumper with a full swingout with the spare mounted. Thinking my Ironman springs might be too light duty...
 
i have the bilsteins with 2" ironman coils. fully loaded drawers in the back and the ride is nice. also tow a pop up camper quite a bit and the bilsteins hold up well with this application as well. mostly dirt and gravel roads with the occasional bumpy rocky road.
Hi jsmo, which Ironman springs do you have? Looks like the 25bs (saw your for sale thread)? Would you say those are too light duty for a rear bumper w full swing out and tire mount? Trying to decide if I need to replace coils at the same time as my shocks. Would appreciate any advice on shocks as well...I'm comparing Fox 2.0 Performance IPFs vs the Bilstein 5100s.
 
I really like the fox shocks I have on my 80, I have bilstiens in the front that are probably too light for the 6BT.

There are some folks that say running long days on dirt roads heat them up too much where they won't perform in comparison to something heavier with reservoirs but it's a non issue for me.
 
How are you liking your setup? I just bought my first 80 series ('94) and need new shocks and perhaps new springs (I have Ironman TOYO25B and TOYOT24B which are rated from 0-200kg). Looking at the Bilstein 5100 and Fox 2.0 Performance IPF. How have you liked your Bilsteins? Any recommendations?

I'll also mention I have an ARB bumper (no winch) and custom rear bumper with a full swingout with the spare mounted. Thinking my Ironman springs might be too light duty...
i have the iron man 13b (performance with accessories) rear springs. same coil thickness as the 25b springs, just taller. the bilsteins have been good for my use which is mainly dirt and gravel roads and pulling a pop up camper.
 
I have Fox 2.0 IPF and I CANT STAND THEM..They are way to stiff for me. I feel every bump and crack in the road.
 
Back
Top Bottom