Oil pump cover issues

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 18, 2015
Threads
21
Messages
444
Location
North Georgia
I was fixing radiator, front main oil sending unit, oil pump cover leaks in my 97 recently and rounded out a screw in the pump cover. Upon researching how to fix this problem. I came across "Texas know how's "video on the oil pump cover and his issue with one screw lower right bottom screw breaking his bit in the screw head. My pump cover screw did the same thing as his in the same place. I noticed that it was the only screw of the 7 that had a black coating on the threads. Possible thread lock? My question to the collective is if you have done this fix and had a screw round out was it the lower right one as was the case for me. Just curious.
 
Did this seal replacement last spring with no issues.
 
I have done 6-8 of these in the last few years. Only had problems with 2 screws. Drilled the heads off and the threaded section came out clean with pliers. Not the same 2 screw positions. Use a good bit and tap it into position with a small hammer. Then use an impact gun to drive it out. John
 
Oh I've already done all the work. I was curious if anybody has had the same screw on the bottom right was the hardest one to get out
 
Back
Top Bottom