oil filter regulator

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 13, 2012
Threads
69
Messages
553
Location
fort smith, arkansas
im one step away form putting a .30-06 through the block and being finished with this project lol.

my 67-40 had some sort of janky aftermarket remote oil filter setup, so I purchased the OEM setup from the 69-73 model from a member here on mud. I got the hoses, and the filter mount and a filter, even bolts. I had to remove the regulator from the block to get my old aftermarket hoses off, so of course the gasket is junk. the gasket is NLA from Toyota, can anyone point me to an aftermarket one? p/n is 1531860010 from the drawing im looking at.. also does the regulator feed the filter? or other way around?
 
small update, even though Toyota officially has the regulator as NLA I found an oem one on toyotapartsdeal for 20 bucks while searching for the gasket.. so I bought it, I know this wasn't my initial question but for 20 dollars ill replace it as well and hell maybe it will come with a gasket.
 
RTV it is
 
Your local autoparts store carries gasket paper. I usaully have some on the shelf in various types. I cut my own gaskets all the time. It's usually quicker than going to the store. I use spent .22 cal 45, or 30-06 rounds for the bolt holes. I guess i need to get some dies from harbor freight.
 
Make you own gasket! Gasket Indentification/Templates Go there, find the oil regulator gasket pic, click on it and print that out at 1:1 then use that to cut out a new gasket.
 
Make you own gasket! Gasket Indentification/Templates Go there, find the oil regulator gasket pic, click on it and print that out at 1:1 then use that to cut out a new gasket.

I used to do it all the time in the navy, so im pretty quick at it. If I could have found the oem one for 2-3 bucks it would have been find but ill either cut it or Permatex it tonight.
 
Back
Top Bottom