Everyone I know should have a TIG welder.
Nat, buy that, but let Lane play with it a bit first.
I like coffee and beer.
Nat, buy that, but let Lane play with it a bit first.
I like coffee and beer.
||| Official YT For Sale/Trade/Wanted Thread |||
- Thread starter mopar
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
I broke the knob off one the windshield knobs (that fasten the windshield in the up position) on the 73 FJ40. Does anyone happen to have a spare one or two kicking around they would like to sell, they don't have to look pretty, they just have to work. T.I.A.
I have one for you Gus
Cleaning out the garage-
I have a 4 speed transmission with xfer for free. It was Shumate's but he has a few others and I'm sure he doesn't want it back. No shipping.
FJ60 front bumper- free, in good shape, no shipping
will list more stuff tomorrow
I have a 4 speed transmission with xfer for free. It was Shumate's but he has a few others and I'm sure he doesn't want it back. No shipping.
FJ60 front bumper- free, in good shape, no shipping
will list more stuff tomorrow
Last edited:
Let Wally know about the tranny. He might be able to use it.
"I have a 4 speed transmission with xfer for free. It was Shumate's but he has a few others and I'm sure he doesn't want it back. No shipping."
"Let Wally know about the tranny. He might be able to use it."
Jasons coming up on saturday to install a parking brake conversion on his split case. I'll see if he can bring it with him. I'll give it a once over before it goes to Wally. This might save some travel miles on the tranny 'cause I'm sure it would end up here for a check up anyways.
Jr.
"Let Wally know about the tranny. He might be able to use it."
Jasons coming up on saturday to install a parking brake conversion on his split case. I'll see if he can bring it with him. I'll give it a once over before it goes to Wally. This might save some travel miles on the tranny 'cause I'm sure it would end up here for a check up anyways.
Jr.
I'm heading to VT in 2 weeks and could drop it there. Let me know what you want to do.
Fogblanket needs to drop some tires off at my house soon so maybe he can grab the 4 speed and drop it at Shumate's house or vicey versey.
Yeah if we can work something out before Saturday that would work.
I'm around all week
More junk:
swingout tire carrier (not a toyota one)- Free
Grant GT steering wheel- Black and gray fake leather, like new, $25
Bellhousings- 2H - Best offer
Flywheels- 2H and an unknown one- best offer
2 front springs for a 40 series- free
16" Aussie split rims- $40 each
FJ40 filler neck for gas tank- basically the metal part plus the rubber hose- free
swingout tire carrier (not a toyota one)- Free
Grant GT steering wheel- Black and gray fake leather, like new, $25
Bellhousings- 2H - Best offer
Flywheels- 2H and an unknown one- best offer
2 front springs for a 40 series- free
16" Aussie split rims- $40 each
FJ40 filler neck for gas tank- basically the metal part plus the rubber hose- free
my plan, well what was approved by the control tower is to head up to flippers on Saturday morning. if that helps anyone let me know
I'll take the tire carrier if it will fit the 6 lug wheel. Need to set something up for the spare for the rear of the 45.
Troopy for Sale...
I have been thinking about this for sometime and I think it is time. I am sure to do this now I will take a bit of a beating, but I am sick of seeing this sit with little work being done to it. I wanted to post it up for you guys first before I put it anywhere else. If no interest, I will move it to the main board and the 45 section....
1979 HJ45 Troopy. Top off currently. Asking $8000 obo. I bought this Aussie gem 2/3ish years ago and my rebuild has moved at a snails pace. I had big plans but have little time to follow through on them. Overall the troopy runs great. I drive it weekly and it spent sometime as my daily driver in the fall.(yes, by choice) Performed great on the 34 mile round trip run. Its not a great highway ride...4spd.. I have done a fair amount of work, but this is by no means a turn key truck.
The truck needs much electrical attention. The system had been fairly hacked before I got it and I have done little to it. Most of the electrics work, just needs to be straightened up.
The body does need attention in a few spots. The very rear has some holes, but is not a total loss. The troopy top sides need a lot of work to be repaired. They are fixable, but they are the worst in my opinion. The raingutter is junk, but I have one from ccot to be installed.
The frame is unbelieveable! Cleanest cruiser frame I have ever seen. That's what sold me on her in the first place.
Engine, I replaced a few freeze plugs, thermostat housing, fan, glow plugs, belts, fliters, and several other things. The Alternator has been rebuilt as well as the starter. Its runs solid and has been outstanding. The exhaust needs some work.
Suspension, currently the 2 of the spring packs have a broken leaf or 2 in them. I have a set of OME 2 1/2 to replace them, including shocks. You will need shackles to fit them, but its all there.
Tires, what came with it I still have. It rolled in on 60 series wheel and tall skinny bridgestones(AU versions) and one split rim as the spare. I bought 5 BFG KM2 33X10.5's and rock rims. They are included in the price. They have less than 1k miles on them. If you don't want them I will drop the price $1000.
I could go on with everything but if you are interested let me know and I will continue on, but I think you get the idea. The bottom line, this is a great base for a great project, I am just disappointed I have not been able to finish it... Couple pics and more if you want them:
This is how she looked when I first got her minus the front bumper and a bit of cleaning. I do have the "Roo" bumper too to go with it.
This is a more recent pic. Top off...
I have been thinking about this for sometime and I think it is time. I am sure to do this now I will take a bit of a beating, but I am sick of seeing this sit with little work being done to it. I wanted to post it up for you guys first before I put it anywhere else. If no interest, I will move it to the main board and the 45 section....
1979 HJ45 Troopy. Top off currently. Asking $8000 obo. I bought this Aussie gem 2/3ish years ago and my rebuild has moved at a snails pace. I had big plans but have little time to follow through on them. Overall the troopy runs great. I drive it weekly and it spent sometime as my daily driver in the fall.(yes, by choice) Performed great on the 34 mile round trip run. Its not a great highway ride...4spd.. I have done a fair amount of work, but this is by no means a turn key truck.
The truck needs much electrical attention. The system had been fairly hacked before I got it and I have done little to it. Most of the electrics work, just needs to be straightened up.
The body does need attention in a few spots. The very rear has some holes, but is not a total loss. The troopy top sides need a lot of work to be repaired. They are fixable, but they are the worst in my opinion. The raingutter is junk, but I have one from ccot to be installed.
The frame is unbelieveable! Cleanest cruiser frame I have ever seen. That's what sold me on her in the first place.
Engine, I replaced a few freeze plugs, thermostat housing, fan, glow plugs, belts, fliters, and several other things. The Alternator has been rebuilt as well as the starter. Its runs solid and has been outstanding. The exhaust needs some work.
Suspension, currently the 2 of the spring packs have a broken leaf or 2 in them. I have a set of OME 2 1/2 to replace them, including shocks. You will need shackles to fit them, but its all there.
Tires, what came with it I still have. It rolled in on 60 series wheel and tall skinny bridgestones(AU versions) and one split rim as the spare. I bought 5 BFG KM2 33X10.5's and rock rims. They are included in the price. They have less than 1k miles on them. If you don't want them I will drop the price $1000.
I could go on with everything but if you are interested let me know and I will continue on, but I think you get the idea. The bottom line, this is a great base for a great project, I am just disappointed I have not been able to finish it... Couple pics and more if you want them:
This is how she looked when I first got her minus the front bumper and a bit of cleaning. I do have the "Roo" bumper too to go with it.
This is a more recent pic. Top off...
Good luck. Hope it stays local.
74 toyota land cruiser
no affiliation. pics are weird and not sure what's up with the top. $3500. It's 2 towns over from me so if anyone wants me to check it out I will.
no affiliation. pics are weird and not sure what's up with the top. $3500. It's 2 towns over from me so if anyone wants me to check it out I will.
Hey Rick. How much for the drill press?
Also interested in the hi lift lock.
Also interested in the hi lift lock.
Last edited:
Free add , do U want'em?
Sure. I'll take them and the torches too. and the birf/axle.
Thanks Rick!
Last edited: