Official ONSC member buying/selling thread

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

1/3 hp motor

Anybody want this??
I rather give it away, then scrap it. It ran a homemade air compressor I made to many years ago. I work in Charlotte.
Dayton 1/3 hp.
Shane

motor.webp
 
Anyone in the local Raleigh area have a 2f motor they'd like to sell?

Not a member of ONSC (so dont know if its ok to post here) but I found out my nonrunner of an fj62 has a bad crank bearing. As long as its getting a rebuild I was toying with the idea of putting the $ into building a 2fe.

From my reading on Mud it sounds like the later the year 2f and the more complete the better since accessory brackets will take some head scratching

thanks
 
Wanna Cruz said:
Anyone in the local Raleigh area have a 2f motor they'd like to sell?

Not a member of ONSC (so dont know if its ok to post here) but I found out my nonrunner of an fj62 has a bad crank bearing. As long as its getting a rebuild I was toying with the idea of putting the $ into building a 2fe.

From my reading on Mud it sounds like the later the year 2f and the more complete the better since accessory brackets will take some head scratching

thanks
Click to expand...

Guy in NC mountains has a 2f for sale. FYI from Craigslist

We are parting out this FJ, not selling it whole, so please do not ask. It is a shame this wagon is so far gone with rust and rot, because it runs and drives excellently. The 2F engine runs great and I test drove it thru all the gears. The H42 transmission shifts fine with no unusual noises. I put the 4x4 thru the paces and it crawls around like a goat. The diffs are 9 1/2" ring gear, 3.70 ratio. Most of the body panels are too rusty to use. There are some good interior parts: trim, switches, etc. All parts are for sale. Text and email will be ignored. *****!!!!! PHONE CALLS ONLY !!!!!***** Bruce (828)775-5149 or Don (828)776-7206
 
The piece that keeps my antenna fastened to the body and away from the metal disappeared. Anybody have one they don't need? Right now there's just a hole with an unsteady antenna poking through. Radio sounds like crap...
 
k4azy said:
The piece that keeps my antenna fastened to the body and away from the metal disappeared. Anybody have one they don't need? Right now there's just a hole with an unsteady antenna poking through. Radio sounds like crap...
Click to expand...

X2. Mine is missing as well
 
k4azy said:
The piece that keeps my antenna fastened to the body and away from the metal disappeared. Anybody have one they don't need? Right now there's just a hole with an unsteady antenna poking through. Radio sounds like crap...
Click to expand...



Not quite sure what piece you are looking for but i'll look from my pile of parts destined to the junk yard to see what i have still
 
lt1fire said:
Not quite sure what piece you are looking for but i'll look from my pile of parts destined to the junk yard to see what i have still
Click to expand...

Dude. Let me rummage through that pile
 
96Cruiser13 said:
Dude. Let me rummage through that pile
Click to expand...


You can if you want to but it's going to the scrap yard next week.


I seriously doubt there is anything you would want in it anyway.

couple bent control arms. 3 doors one really smashed up. couple other odds and ends.

tell me what you are looking for and i'll see if I have it.
 
lt1fire said:
You can if you want to but it's going to the scrap yard next week.

I seriously doubt there is anything you would want in it anyway.

couple bent control arms. 3 doors one really smashed up. couple other odds and ends.

tell me what you are looking for and i'll see if I have it.
Click to expand...

I am looking for the front metal panel for a 97 and the grill maybe a passenger side light if it is good price.
 
Roxx said:
I am looking for the front metal panel for a 97 and the grill maybe a passenger side light if it is good price.
Click to expand...

Pretty sure I have none that.... maybe the light.... can't remember if I threw that away last year or not. I'll let you know.
 
lt1fire said:
Not quite sure what piece you are looking for but i'll look from my pile of parts destined to the junk yard to see what i have still
Click to expand...

There's a rubber or plastic grommet that holds the antenna at the base of the mast and then a nut that threads to the top of the grommet iirc.
 
For Sale FJ-40 Auxilary Fuel Tank

Poly tank made by Fuel Safe Racing Cells for Downey Offroad. Excellent condition, but missing fuel filler tube (between neck and tank) and mounting straps. Fuel pickup plate has been modified to take a stock LC sender.

Mark's Offroad sells this kit for $580.

http://www.marksoffroad.net/1specials/AuxTank2011.html

Asking $150 O.B.O.

If interested, email me at SeriesLR(at)gmail(d0t)com

Local Pickup Only.

DSC07425.webp
 
Cirbo said:
Poly tank made by Fuel Safe Racing Cells for Downey Offroad. Excellent condition, but missing fuel filler tube (between neck and tank) and mounting straps. Fuel pickup plate has been modified to take a stock LC sender.

Mark's Offroad sells this kit for $580.

http://www.marksoffroad.net/1specials/AuxTank2011.html

Asking $150 O.B.O.

If interested, email me at SeriesLR(at)gmail(d0t)com

Local Pickup Only.
Click to expand...

Wish I could find a way to wedge that into my 100!
 
Finally got my ham radio and CB installed in the 80 but don't have a CB antenna mount yet. It looks like most folks go with the yodatech mount but $30 seems a bit steep for what it is. I ordered a NGP side mount+firestik+coax for not much more. I'm not happy with that since I have ample ground plane to do this right.

So... anybody have an antenna mount laying around? A lip mount for the rear hatch (passenger side) would be ideal.

Also, if anyone is interested in a complete, unopened Firestik LG4M2-B 4 ft. Side Mount Antenna with Ngp Kit for a camper or boat I'll give it to you for $50 (you save $5+shipping) to save me the trouble of sending it back to Amazon.

Finally, any of you local guys (Triangle) interested in some welding work? I need to mount my hi-lift to my rear bumper and could use a couple threaded posts put on. PM me please.
 
Looking for soft top half doors for my 74 FJ40 ... gray if possible.
 
You must log in or register to reply here.

Share this page

Back
Top Bottom