Official ONSC member buying/selling thread (5 Viewers)

[Yukon LX]

Pics: Super Black Eagle 1 For Sale

for sale: Benelli super black eagle 1.

This gun is virtually brand new. It has had less than a box of shells though it and does not have a single scratch on it.

The sbe has a 26 inch barrel and a walnut stock. It shoots 2 3/4, 3 and 3 1/2 inch shells.

This is a great gun. I have the exact same gun and have thousands of rounds through it with 0 problems. I also have a browning, remington, and savage, and have not hunted with these guns since getting the sbe 11 years ago.

The gun comes with the original case, and cylinder, improved, modified, improved modified and full chokes.

Again this thing could be in a showroom as a new gun!! The gun is in raleigh if anyone would like to see it.

Edit: I believe i have the manual for it as well.

 

[Yukon LX]

more pics

 

[Yukon LX]

more pics

 

[Yukon LX]

^ Now thats a clean, reliable, beautiful gun. $1,000 even.

 

[Mtbcoach]

Yes it is, very nice and clean...

 

[GLTHFJ60]

Lots of post-4BT swap parts for sale

Custom FJ60 exhaust
- 2.5" header-back system
- 2.5" catalytic converter
- 40 series flowmaster
- made by Henry's Muffler shop
- was on Moonshine as a hard-mounted exhaust, but took off for the diesel conversion
- is set up to be no lower than the frame rail at any point ( high clearance )
- can be set up to use the stock hangers
Paid $600 to have installed, asking $200 OBO

Man-a-fre 2F 6-to-1 Header - SOLD - Pending payment / shipment

Various 1987 2F Parts
- Rebuilt carb ( Toyota components )
- Cylinder head
- Alternator
- thermo housing
- various brackets
- oil pan
- side cover
- dizzy
$ - Make me an offer

FJ60 Full Floating Axle
- complete minus 3rd member
- comes with Poly Performance / Synergy Suspension chromoly axle shafts ( installed )
- comes with ARP hub studs ( installed )
- comes with new brake shoes ( can be installed, currently not )
- new bellcrank cables, wheel cylinders and wheel bearings in 2009
- has SOA and SUA perches welded on
- one spindle has been professionally repaired
[STRIKE]$1000 OBO[/STRIKE] $800 to current ONSC Members

Saginaw PS Pumps
- two with pulley and reservoir - $40 each
- one brand new pump w/0 pulley or reservoir - $40

NP203 Transfer Case
- perfect for using as a gear reduction box behind a GM transmission
$50

Get some of this stuff out of my garage! If it's not listed here but it came on an '87 2F, ask and I just may have it!

 

[GarnerFJ40]

I'll take the two saginaw pumps with pulleys and reservoirs...

 

[GLTHFJ60]

I'll take the two saginaw pumps with pulleys and reservoirs...

Shall I bring them tonight?

 

[GarnerFJ40]

Sure...

 

[southerncruiser62]

Anyone know a good source for a carb spacer/insulator for a F155 engine? I attempted to install my new troll hole carb and ended up doing this to my spacer trying to bend the tube to fit.

Do some have the vacuum tube that comes straight off the spacer instead of bending up at a 45 degree angle? Trying to figure out why folks say his carbs are just plug and play since that's not the case for me.

I might have one I will check tomorrow.

 

[marcjs]

FJ40 Fiberglass Tub FS in Mooresville

SOLD!
PRICE REDUCED FOR A QUICK SALE - I WANT THIS OUT OF MY GARAGE!

I picked up a fiberglass tub (sorry - not a Gozzard but the Stateside one) a few months back from a fellow 'Mudder but have decided to go with an Aluminum tub instead.

Tub is generally in good condition, and will be sold with matching fiberglass fenders joined to steel aprons. Tub, fenders and aprons were all acquired sprayed with metallic grey paint (reasonable job by the look of it). Tub shall be sold bare - no steering column/pedals/brake-booster/wiring-harness etc. will be included. The windshield frame and factory roll-bar will be included in the sale.

Price for the items mentioned is [STRIKE]$1500 [/STRIKE]$1000.

I also have a matching steel painted hood, grille and emblem which could be purchased with the tub.

Everything is in good shape, although the left-side steel guide-tube which a hardtop would locate into appears to have rusted at the attachment to the floor and would require attention if future owner was planning on fitting a hardtop.

Thanks for looking!

Link to tub pictures.

Link to fender pictures.

 

[77cruiser]

Met this guy today randomly. He'd never heard of ih8mud. 1982 fj60. 225 on body but only 15k on rebuilt 2f. Truck was in awesome shape. It on Charlotte Craigslist as of this morning for 4500 which is a great price.

 

[77cruiser]

Sorry I left off the picture

 

[cruiser4life]

^ Now thats a clean, reliable, beautiful gun. $1,000 even.

Yes it is. I can't speak to price as I don't know the market on used SBE1 but based on my experience will vouch for this gun, well the same platform, next gen SBE2, as the best semi-auto 12 gauge made today IMO.

I have abused mine, hunting hard, mostly in salt water for years and it never fails to perform. Others I hunt with have the same results with their SBEs. I absolutely love mine and wouldn't duck hunt with anything else.

Bump for a great gun, GL with sale.

 

[PhrogsPhorever]

So, clearing out stuff for the move

M416 trailer. Great shape, had grand plans for it, but wont have the room to store it or time to work the project. I have LED lights mounted, a pintle mount for it and a spare tire/wheel. Has NC title.

$800 takes it, can drop it as far as Fayettville or the Triangle.




Camping Lab 47x95 roof top tent. Comes with ladder extension, load bars and gutter mounts, and I think I have the rack attachment stuff.

Tent is in excellent shape and was only used a few times, I had it open last week to air it out. Will add pics of open tent on request. $600 if I move the trailer west, I can bring the tent along and drop at Fay or RDU.

Details here
http://campinglab.com/carpatecho02.html

 

[krzyabncanuck]

I will speak for the trailer right now.

 

[PhrogsPhorever]

I will speak for the trailer right now.

Hokey-dokey

As you can see, I need to make a run to the dump

 

[dbenke]

Old bed frames can be used for all kinds of brackets...I have whats left of a set in my metal scrap

 

[Yukon LX]

^ Now thats a clean, reliable, beautiful gun. $1,000 even.

SOLD!

 

[GLTHFJ60]

Lots of post-4BT swap parts for sale

Custom FJ60 exhaust
- 2.5" header-back system
- 2.5" catalytic converter
- 40 series flowmaster
- made by Henry's Muffler shop
- was on Moonshine as a hard-mounted exhaust, but took off for the diesel conversion
- is set up to be no lower than the frame rail at any point ( high clearance )
- can be set up to use the stock hangers
Paid $600 to have installed, asking $200 OBO

Man-a-fre 2F 6-to-1 Header
- split flange to reduce chances of warping
- ceramic coated inside and out to reduce rust
$150 OBO

Various 1987 2F Parts
- Rebuilt carb ( Toyota components )
- Cylinder head
- Alternator
- thermo housing
- various brackets
- oil pan
- side cover
- dizzy
$ - Make me an offer

FJ60 Full Floating Axle
- complete minus 3rd member
- comes with Poly Performance / Synergy Suspension chromoly axle shafts ( installed )
- comes with ARP hub studs ( installed )
- comes with new brake shoes ( can be installed, currently not )
- new bellcrank cables, wheel cylinders and wheel bearings in 2009
- has SOA and SUA perches welded on
- one spindle has been professionally repaired
$1000 OBO

Saginaw PS Pumps
- two with pulley and reservoir - <SOLD>
- one brand new pump w/0 pulley or reservoir - $40

NP203 Transfer Case
- perfect for using as a gear reduction box behind a GM transmission
$50

Get some of this stuff out of my garage! If it's not listed here but it came on an '87 2F, ask and I just may have it!

Updated. Still have lots of good parts to sell!!