Official ONSC member buying/selling thread (3 Viewers)
- Thread starter southerncruiser62
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Joined
- Jan 16, 2003
- Threads
- 345
- Messages
- 3,650
- Location
- Charleston
- Website
- www.oldenorthstatecruisers.com
- Thread starter
- #262
Matt, I got 3 driveshafts if you need one. Just let me know...
I have some laying around here also taking up space.
Let us know.
Let us know.
I can use a driveshaft around 27inchs 1976
thanks guys
thanks guys
hay Maria is that top from the fj40 in north raleigh
Matt yes that is the top.
Soft top is SOLD!
Still have:
Roll Bar with front cage
Brake booster
Wire Harness
Aprons
All switches
Rear axle
windshield......and a few more parts from 77 fj40.
Still have:
Roll Bar with front cage
Brake booster
Wire Harness
Aprons
All switches
Rear axle
windshield......and a few more parts from 77 fj40.
Cleaning out basement....parts need a good home..
A variety of leftovers and other stuff from my 79FJ40 restoration project...thought I'd keep most of this for my next project but that probably isn't going to happen so time to clean out the garage...PM me for pictures and pricing. Rather see this stuff go to folks local but if no takers then I'll regretably put it on eBay....
I have pics of most everything. Thanks, Tom
Rancho shocks - used
leaf springs w/u-bolts and shackles -painted POR-15
jump seat-set (sand blasted/POR-15/topcoated black - good/fair; some foam no covers)
jump seat-set (sandblasted/POR-15/topcoated black - good; have foam but no covers)
jump seat - single (frame good/covers fair)
(note on the jump seats - I'll throw in some brushed stainless steel screws to attach new covers - I used these on my restoration project and they look great!)
Warn locking hubs (2) - used/cleaned/greased/ready to go
distributor - used '79
wiring harness-front - used '79
hub guards -painted/POR-15
plastic fuse box cover - used '79
heater blower/firewall mount -restored (very nice)
lockable metal storage boxes - mount @ front of frame/bumper (sandblasted and POR-15 with black topcoat - these are very heavy duty!)
radiator - used '79 Good condition/painted
plastic radiator fan - used with no clutch
old seat belts - rear
inspection light plug in glovebox - used '79
side marker lights red lens - used
heater duct -large (from blower to heater beneath the dash) -used '79
right defrost hose w/side defroster -used '79
left rear taillight splash guard -used '79
emission computer - used '79
cleaned/rebuilt 2F carb - never used since rebuild
front heater pipes thru firewall w/grommet- used '79
fuel separator @filler neck- plastic - used '79
seat belt warning buzzer - used '79
bottle jack mount/bracket -used '79
parking brake lever bracket - sandblasted/POR-15 - used 79
window regulator w/glass - used late model
windshield rubber gasket - used '79
windshield glass - few nicks - good for trail truck
rear door glass rubber gaskets - used '79
double battery box/hold down -used
clutch & brake pedal housing bucket -used '79
clutch master cylinder - with rebuild kit - used '79
throttle linkage bracket at firewall - used '79
A variety of leftovers and other stuff from my 79FJ40 restoration project...thought I'd keep most of this for my next project but that probably isn't going to happen so time to clean out the garage...PM me for pictures and pricing. Rather see this stuff go to folks local but if no takers then I'll regretably put it on eBay....
I have pics of most everything. Thanks, Tom
Rancho shocks - used
leaf springs w/u-bolts and shackles -painted POR-15
jump seat-set (sand blasted/POR-15/topcoated black - good/fair; some foam no covers)
jump seat-set (sandblasted/POR-15/topcoated black - good; have foam but no covers)
jump seat - single (frame good/covers fair)
(note on the jump seats - I'll throw in some brushed stainless steel screws to attach new covers - I used these on my restoration project and they look great!)
Warn locking hubs (2) - used/cleaned/greased/ready to go
distributor - used '79
wiring harness-front - used '79
hub guards -painted/POR-15
plastic fuse box cover - used '79
heater blower/firewall mount -restored (very nice)
lockable metal storage boxes - mount @ front of frame/bumper (sandblasted and POR-15 with black topcoat - these are very heavy duty!)
radiator - used '79 Good condition/painted
plastic radiator fan - used with no clutch
old seat belts - rear
inspection light plug in glovebox - used '79
side marker lights red lens - used
heater duct -large (from blower to heater beneath the dash) -used '79
right defrost hose w/side defroster -used '79
left rear taillight splash guard -used '79
emission computer - used '79
cleaned/rebuilt 2F carb - never used since rebuild
front heater pipes thru firewall w/grommet- used '79
fuel separator @filler neck- plastic - used '79
seat belt warning buzzer - used '79
bottle jack mount/bracket -used '79
parking brake lever bracket - sandblasted/POR-15 - used 79
window regulator w/glass - used late model
windshield rubber gasket - used '79
windshield glass - few nicks - good for trail truck
rear door glass rubber gaskets - used '79
double battery box/hold down -used
clutch & brake pedal housing bucket -used '79
clutch master cylinder - with rebuild kit - used '79
throttle linkage bracket at firewall - used '79
Fort Knox
SILVER Star
How much for the rear seat belts? I only really need one side.
PM replied to...
Last edited:
Sorry Fort Knox- the rear seat belts are gone. Cruiser4Life - PM sent on the other.
Also - I have a 'bucket' of original Toyota nuts/bolts that came off my truck during the resto -- I replaced everything with stainless steel (grade 8 yellow zinc on drive train) --- so all the old stuff was bagged for storage.
Also - I have a 'bucket' of original Toyota nuts/bolts that came off my truck during the resto -- I replaced everything with stainless steel (grade 8 yellow zinc on drive train) --- so all the old stuff was bagged for storage.
PM sent
Crewzerdog, I got the pics of the carb, consider it and the linkage sold.
Eskimo
SILVER Star
Toyota 1" bore MC (not reman)
This MC was purchased as a NEW unit from Toyota, and has been run for 1-2 years on my trail rig. 1" bore. all seals are as new, reservoir is clear, not discolored at all, doesn't leak at any angle. Just needed a little bit bigger one for the Rocks.
$100obo
This MC was purchased as a NEW unit from Toyota, and has been run for 1-2 years on my trail rig. 1" bore. all seals are as new, reservoir is clear, not discolored at all, doesn't leak at any angle. Just needed a little bit bigger one for the Rocks.
$100obo
what you want for the best set of jump seats
I am in boone, nc
I have a 75 fj40 would they fit?
got pictures??
Debbie
I am in boone, nc
I have a 75 fj40 would they fit?
got pictures??
Debbie
83 FJ60 For Sale
I'm putting my FJ60 back on the market, I have 3 cruisers now and don't have time for all of them. Plus if I sell one I have money to spend on the others, heh. It's an '83 with a '93 chevy 5.7L TBI engine. Cruiser 4 speed and split transfer case. Good 32" x 11.50" tires, aluminum wheels, Pioneer CD/MP3 player, homemade rear storage box, Reese hitch, and a HUGE roof rack.
Problems.. A/C causes it to overheat (runs fine without A/C or with A/C on cooler days), transfer case leak.
I'm asking $4000
pic....
Oh.... In Greensboro...
I'm putting my FJ60 back on the market, I have 3 cruisers now and don't have time for all of them. Plus if I sell one I have money to spend on the others, heh. It's an '83 with a '93 chevy 5.7L TBI engine. Cruiser 4 speed and split transfer case. Good 32" x 11.50" tires, aluminum wheels, Pioneer CD/MP3 player, homemade rear storage box, Reese hitch, and a HUGE roof rack.
Problems.. A/C causes it to overheat (runs fine without A/C or with A/C on cooler days), transfer case leak.
I'm asking $4000
pic....
Oh.... In Greensboro...
Last edited:
I still have the 78 axles. Taking realistic offers (PM me)
FS - 1993 Mercedes Benz Turbo Diesel
I am selling my 1993 300D Turbo Diesel if anyone is interested. It is a great car, I just prefer driving a Land Cruiser.
Gray with Gray Interior
Interior is a 9.5 out of 10
The exterior is a 7 out of 10
32 mpg combined
AC
209k miles
$5000 or best reasonable offer
The car is located in Raleigh.
Thanks,
uzj100
I am selling my 1993 300D Turbo Diesel if anyone is interested. It is a great car, I just prefer driving a Land Cruiser.
Gray with Gray Interior
Interior is a 9.5 out of 10
The exterior is a 7 out of 10
32 mpg combined
AC
209k miles
$5000 or best reasonable offer
The car is located in Raleigh.
Thanks,
uzj100
