off road newbie

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 15, 2007
Threads
18
Messages
60
Location
Sacramento, CA
ok first, is it better to keep it in 4H or 4L when mudding?
And how long can i keep front and rear diffs locked for?
How fast can i go while locked up?
sorry but i have no idea
 
ok first, is it better to keep it in 4H or 4L when mudding?

I'll take this one. ;)

It's best to keep the TC in whichever range lets the tranny keep its rpm's up and run through its gears. As an extreme example, bogging down in 4L 1st is highly preferable to bogging down in 4H 1st.

In addition, it never hurts to be in Lo unless you're running out of gears...

Curtis
 
Having your lockers engaged when you shouldn't is how things get broken. Go to the thread titled FAQ for 80/lx450 series. Scroll down to the general section and read the link "diffs for dummies" to understand how the lockers work.

Now a lot of folks who brek their birfield (Front axle CV joint) have the front locker engaged and are turning slightly or doing something else to put additional stress on that axle.

Use the lockers only when you need it. The rear locker axle isn't as suceptible to damage and can be used for a while in rough terrain. The front should be turned on just before you need it going straight up an obstacle and turned off as you crest the top and don't need the locking action. Bear in mind it will likeley to a few feet to engage or dis-engage with factory lockers.. Until the front locker disengages, turn easy and be careful until it dis-engages. This advice could save you from having to rebuild an axle on the trail. Course, this doesn't mean you can't still break a birf :D
 
Back
Top Bottom