OBDII location

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

One port located in the cab behind the fuse panel and another in the engine compartment on the firewall.
 
In the engine i dound it for sure but in the can above the fuse box did not exist even i remove some parts from the dashboard and didnt dind it. As well my car still mint condition everything is original.
 
Why do you assume you have an obd2 connector in your 80? Not all world markets were obd2...

What market was it from? Some details would help...

cheers,
george.
 
Go to your dealer and ask if it was OBD2. I'll bet your market was *NOT* OBD2...

cheers,
george.
 
State your year of 80 series.
Late '94 builds (mainly sold as '95's) through '97 are the OBD2

Also, are you in Lebanon the country or Lebanon ID (or another in USDM)?

If a USDM LHD market 80, your OBD2 socket is just above the fuse panel sharing the common dashboard cover by your left knee. If it's not there, IDK what to tell you aside from going back to model production year.
 
Mine is 1997 model final series vx limited edition. I search everywhere didnt fi d the obd do u have the wiring of the obd make i can install one??

State your year of 80 series.
Late '94 builds (mainly sold as '95's) through '97 are the OBD2

Also, are you in Lebanon the country or Lebanon ID (or another in USDM)?

If a USDM LHD market 80, your OBD2 socket is just above the fuse panel sharing the common dashboard cover by your left knee. If it's not there, IDK what to tell you aside from going back to model production year.
 
Guys... it's real simple. NOT ALL THE WORLD got OBD2 in that 'era'. Most likely his BOUGHT in LEBANON (not the US one) is NOT OBD2...

Certainly 1FZ 70 series in oz were NOT OBD2 back then. Mate's was NOT OBD2 and NEWER and with coil packs than my '97.

cheers,
george.
 
Doesn't VX indicate non USA vehicle?

That's what/why I'm leaning towards this being a ROW issue 80. Even if he's in say Lebanon, Idaho - there's lots of imported RHD 80's by virtue of Vancouver, BC importers bringing in the ones that are legal (same reason we see alot of older Nissan Skylines locally - I know of 3 in my little hicktown of <75K population).

Since he didn't state the origin of his 80 - I'm betting he's in Lebanon the country by VX trim code.

I believe OBD as a whole is a USA emissions driven package (non-USA residents, am I correct?) - so it's believable the OP simply doesn't have that port.

Or has the OBD package gone global by a push for greenhouse gas reduction?

@ OP - if you don't see the socket where we described, and you have a '95-'97 USA model, post a pic. Most likely the VX thing makes yours a ROW prepped 80, so not alot of us here have experience....do you have a 1FZ-FE motor?
 
Seems we're against a language barrier possibly.

Post a pic of your 80, specifically the area to the left knee fuseblock (are you LHD or RHD?)

When you turn the key to position 1 on the way to cranking, do you see a 'check engine' in yellow (both a symbol & text) light up in the cluster bottom row?

I'm betting you've got a ROW model like George said - you simply may not have OBD wiring - so like the Ramones song went - "no brains - no headache".
 
If it is a 4.5 liter gasser with a TRD style SC on it, then it must have some kind of engine management system on it??

Yeah, but it doesn't need to be OBD2 compliant... Like I stated, oz 1fz engines even with coil pack ignition system (which superseded our US 80's) in the 70 series were not OBD2...

e.g. Compatibility – Toyota | ScanGauge.com.au

Red is NON-compliant

cheers,
george.
 
Back
Top Bottom