Nipple Armor

Do you want nipple armor if the cost is $25 or less?

  • Yes

    Votes: 4 40.0%
  • No

    Votes: 6 60.0%

  • Total voters
    10
  • Poll closed .

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Nov 26, 2006
Threads
90
Messages
1,765
Location
San Antonio.
After reading some past posts on busted radiator nipples I had the idea of having a local plastic injection molding company fab some sort of slip on/bolt on armor that would protect the nipple from inadvertant downward force. To everyone thinking up a samrt a$$ reply :flipoff2:

I haven't talked to them yet but I assume that the unit price will be direcetly related to the number ordered. I am hoping to keep the price to $25 or less.

Besides an interest count, my only question is are the brass radiators dimensionally the same as the aluminum ones becuase if this goes ahead it will be based on my 96 aluminum radiator.
 
Already been done....

nips.jpg


:flipoff2:
 
WABC- It seems to me that most of the nipple breakage occurs during engine work mostly by folks who aren't aware of the potential problem. I know some old hats have been guilty of breaking one but I just don't hear about it that much.

I do appreciate the "outside the box thinking".

Buck Buchanan
 
CreeperSleeper, for some reason I can't see your attatched picture. I'll hope it is not related to my work filtering it out for content.

So is it $25 or less?
 
Think Maddona (sp?)
 
That's what I was afraid of.
 
After reading some past posts on busted radiator nipples I had the idea of having a local plastic injection molding company fab some sort of slip on/bolt on armor that would protect the nipple from inadvertant downward force. To everyone thinking up a samrt a$$ reply :flipoff2:

I haven't talked to them yet but I assume that the unit price will be direcetly related to the number ordered. I am hoping to keep the price to $25 or less.

Besides an interest count, my only question is are the brass radiators dimensionally the same as the aluminum ones becuase if this goes ahead it will be based on my 96 aluminum radiator.
Howdy! Just might work, but have you priced out the setup fees for injection molding? Anywhere from $10 grand on up!! My brother does this for a living. John
 
I just took a 1x2, drilled a hole in it and taped it over the nipple. Kept it protected until the job was done.:hhmm:
 
Howdy! Just might work, but have you priced out the setup fees for injection molding? Anywhere from $10 grand on up!! My brother does this for a living. John

I haven't contacted the compny yet but was just going off their business material that stated: "Mold making for high production to low production with low cost molds".

I hope they don't consider 10K low cost.
 
Actually 10k IS low cost in the mold world. One of my clients just paid $130k for a mold.

So $10k would totally be low cost for them
 
Most of the molds my company buys are in the $75K and up range. Even non-production molds can be pretty spendy. JM $.02
 
I talked to the owner of the plastic injection molding company. He said he could farm out the mold and thought he could get one made for about 5K. After that the first unit would cost about $150 to set up his equipment. From there the unit cost drops to less than $5 for each addition unit.

So bottom line with 2 interested 80 owners will be $2577.50 per unit.

So for the price of 5 replacement radiators I can hook you guys up.

Needless to say these won't be going into production until I win the lottery.
 
It is not affordable unless I got over 200 preorders at $25 each.
 
Not that I have taken a look at it to know better but is there something that can be fab'd in metal instead?
 
I just took a 1x2, drilled a hole in it and taped it over the nipple. Kept it protected until the job was done.:hhmm:
Howdy! I''d think that Madonna would complain about the splinters! John
 
Back
Top Bottom