Newbee FJ40 nut

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jul 10, 2006
Threads
9
Messages
72
Location
Auckland, New Zealand
Newbee FJ40 nut Auckland NZ

Hi guys, just thought i might show you my next cash trap (bar my wife and kids).
I am changing it to a soft top and anyone who can help me source parts in New Zealand would like to here from you.

Heres some pics.:)
 
Last edited:
Welcome to MUD! That's a good looking truck.

It looks like, maybe more than anyone else, you need to get yourself a snorkle. :D


Oh, and of course. . . :flipoff2:
Needs snorkle.webp
 
armourguard said:
Yeah i do, but again trying to find parts here without paying arm and leg :confused:


Welcome.


Nice Land Cruiser.



There is nothing inexpensive about owning one of these vehicles, period.
 
that is so cool, i can't help but giggle.
is that tranny shifter for real?
that looks like it has 3 or 4 bends to it.

and holy cow it has no heater??
 
There's plenty of wrecked 40's around, so parts are usually reasonably cheap. If you've got the space, keep an eye out for a rusty wreck for a parts truck. They occasionally appear for around $500. Look at trademe, but be aware some people are asking WAY too much for parts. There's a really good NZ forum for 4WD advice & trips (mostly Christchurch based) at www.offroadexpress.co.nz quite a few people with 40's ranging from stock to highly modified - & all willing to give good advice, & offer parts if you need them. If your aircleaner has been modified for a snorkle, you might be able to make up a cheap one with some flexible hose running through the guard - it works for me! I'll post up some pics if you want...
 
The snorkle was fitted when I got the truck, but I'm pretty sure any exhaust shop could plug off the intake & weld on a new one at the appropriate place. They could also probably provide the flex hose (otherwise ENZED are pretty helpful, but not cheap), or bend up a solid one out of exhaust tube.

DSCF0001.webp

DSCF0004.webp

DSCF0005.webp
DSCF0001.webp
DSCF0004.webp
DSCF0005.webp
 
That's just after I cleaned her up! That "hat" does look a little unusual - not sure where it came from, but it's mounted to the windscreen frame, and holds the top of the snorkle in place with a long hose-clamp. Looks pretty agricultural, but works fine.
 
Back
Top Bottom