newb in Texas

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jul 25, 2007
Threads
5
Messages
25
:beer:

Just got home with my new to me 94 cruiser. It has e-lockers and is in pretty decent shape. I bought it for a hunting/wheeling rig but I may have to daily drive it for a while. I'm not new to wheelin, I had a scout with locked d60's on 42 TSL's that I recently sold after 7 years of working on it.

No immediate plans to go big with this rig, maybe some steel wheels and fat 33's.


oh yeah, I can't get my hood latch to catch, any insight?

Thanks, and great bb.:cheers:
 
Welcome! :flipoff2:

there are two 12mm bolts that hold that hood catch on, right in the middle on the radiator cross member, should be able to loosen those to adjust. But first check the pads on the sides to make sure there aren't any obstructions.
 
oh yeah, I can't get my hood latch to catch, any insight?

I just dealt with this, the cable wasn't retracting after pulling the hood release and therefore the latch woudn't catch. I don't recall exactly what was the fix, but it involved removing the latch itself and fixing whatever was holding the cable. It was very simple, and obvious with the latch in hand. I think I could see the problem before I actually removed the latch by looking at the back (engine) side of it.

It may have been as simple as lubing the latch.

-Spike
 
Thanks for the replies.

I am located in Northeast Texas between the Sulphur and Red Rivers.

I've had my fill of wheelin a big rig for a while, I found out I can't afford to hang with the big boys, too many breakdowns, that's why I sold my 1 ton rig.

I want something capable and reliable, my previous rig was capable but only suited for one purpose.

Thanks for the hood latch recommendations, going out now to adjust on it.
 
Welcome :flipoff2:

Did you figure out the hood thing...? Sounds like spike had a good lead on the fix...
 
Welcome :flipoff2:

Did you figure out the hood thing...? Sounds like spike had a good lead on the fix...

Yes, Spike was dead on. The lever on the back of the latch that the spring connects to was not tripping back in place, needed a little PB blaster, now it works great.

I don't have any pics, I bought it from icu_runnin and I believe he has posted picks on here before. It is a burgundy 80, completely stock, he had 315 BFG's on it, but I bought it with stock tires.
 
Back
Top Bottom