New Speakers! (Install)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Dec 23, 2010
Threads
42
Messages
337
Location
Fort Walton Beach Florida
My Polk DB651 6 1/2" came in today!

Looks Like I'll have a weekend project on my hands.

First I don't know all the intricacies of car audio.

I bought these speakers do to the fact that this guy used them with success on his posts

https://forum.ih8mud.com/80-series-tech/327663-front-door-speaker-upgrade.html

https://forum.ih8mud.com/80-series-tech/329297-rear-door-speaker-upgrade.html

Here's a link to where I bought them

Amazon.com: Polk Audio DB651 6.5-Inch Coaxial Speakers (Pair, Silver): Electronics

And here are the specs off the box:

Power Handling: 180 Watts Peak
Power Handling: 60 Watts RMS
Frequency Response: 35Hz-22kHz
Sensitivity: 92dB
Impedance 4 Ohms

Now for the pics
photo2.webp
photo3.webp
photo4.webp
 
awesome! i installed these exact speakers in my front doors and in my rear doors and they sound fantastic! i also got a really good deal on them from an ebay seller. any how as a heads up if you plan on doing the same speakers in the rear doors you'l have to trim some of the metal from the door away to make these fit, not difficult, just a heads up that it will be necessary.
 
I have the same speakers in my 80. Huge improvement over stock and even over older replacements. I really like them but some of my dub step remixes blew the drivers side :frown: .

Ohh well I only paid $35 on amazon last year.

You may think about painting the grills black. I found the silver to be to "blingy" for my taste.
 
I really like them but some of my dub step remixes blew the drivers side :frown: .

Ohh well I only paid $35 on amazon last year.

Do you have a stock head unit or you got some aftermarket? I can not see my stock head unit blowing these speakers. When i turn my volume close to the middle all my door trims start to rattle.:bang: and it starts to sound like s***.

Also a question for those who installed these speakers in the rear. Why is my rear speakers sound much quieter than the front?
 
When i first installed i had them running off my stock hu, they sounded better but once i got my scion 1808 they came alive. The rears dont really sound much quieter than my fonts.. But then again i am not running the stock hu, stock it runs through the stock amp, the stock amp probably puts out less power to the back and for that reason they probably sound quieter. I would buy an upgraded hu if i were You you'll me amazed as to how much better it sounds! I got my 1808 from a scion forum for 20 bucks plus shipping
 
I will be purchasing these also... probably closer to May though. Would love to see all mods you have to do to get them to fit. Thanks much!
 
I have them in the front doors, have a pair for the rear I haven't installed yet.

They sound pretty good, are priced right, but the grills are fugly (and would still be even if painted black, though it would help).

need to find some mesh grill that fits over them.
 
For those who have already installed some speakers. I'm working on the front passenger door right now.

Looks like the PO cut the wires so all I see are a blue wire w\brown dot and green wire wi\brown dot.

Which one is neg and which one is pos?

Thanks
 
If they are still attached to the old speakers, the positive tab on the actual speaker is usually bigger. Whichever wire is on the larger tab is positive.
 
There were after market POS installed and they were spliced with white wires, in a ghetto fashion, so I couldn't tell which is which.

I'm trying to splice new wire to the factory ones, so I'm just trying to figure out which one is pos and which one is neg.
 
I installed four of these speakers too. They sound great! I used a pair of tin snips and some patience to cut away the excess metal in the doors.
 
I installed four of these speakers too. They sound great! I used a pair of tin snips and some patience to cut away the excess metal in the doors.

Same here. Tin snip lines radiating out from the center and then simply bend the resulting tabs over. Make sure to put in some sound deadener while you're in there.
 
Back
Top Bottom