New Calipers, problem persists

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 4, 2006
Threads
449
Messages
14,193
Location
NorCal
My grungy old calipers were hanging up and getting hot, so I got some new ones.

They were fine around town, so we went for a shake down cruise. About 40 miles in I took an off ramp and I had to pump a few times to get pressure. After a refuel we went another 10 miles down the freeway, and they were hanging up, and the fluid was boiling.

Master Cylinder, or maybe just bad flexible lines?

See my other post for the real pain.
 
I went through this with mine. Rebuilt the calipers and it still locked up. Rebuilt the master and it still locked up. Readjusted everything possible and brakes still locked. I finally sprung for a new OEM master cylinder. Haven't had a brake problem since.
 
You check the Booster rod for length?
 
Mace said:
You check the Booster rod for length?

I was stoked the night I came home to do that. I thought that would be it for sure. I took out almost an inch of adjustment.

OEM MC eh? I've got a spare I could try. Hmm...
 
Back
Top Bottom