Nerf bars for the 80?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Wayne

Bought by His blood, kept by His power
Joined
Oct 12, 2003
Threads
111
Messages
993
Location
Middleburg, Florida
I currently have a set of nerf bars on my '96 and want to replace them with another set. I live in FL, so I don't need a set of sliders.

Have looked around and can't find a set of nerf bars of the 80, can anyone help?

Thanks in advance.

Wayne S
 
I don't want to put the factory running boards back on the Cruiser.
 
Then you're looking at real sliders. The Slee Slider Steps are the only ones that offer a semi-disguised slider look with excellent strength and protection. There are several other slider manufacturers to consider, but they will be more towards a hardcore slider - I don't know of any cosmetic-only nerfs for the 80.
 
Thanks team.

Wayne S
 
ARB side steps are available with or without the fender rails like I have. Not too expensive , good step, moderate protection for the non rock crawler type. Check with your local ARB distributor.
Wild Billy Lake 2007 025 resized.webp
 
I currently have a set of nerf bars on my '96 and want to replace them with another set. I live in FL, so I don't need a set of sliders.

Have looked around and can't find a set of nerf bars of the 80, can anyone help?

Thanks in advance.

Wayne S

So, you have nerf bars, you are happy with nerf bars, and you don't want sliders? Yet, nearly all those who replied are trying to sell you sliders or factory steps.:rolleyes:

I've seen the manik ones on a landcruiser and they looked nice. I may get a set to make it easier for my kids to get in the wagon.
 
dude even if you don't ever plan on using them for rocks.

just buy some sliders.

think side-impact..........

I have a perfect set of factory running boards from my 96 in storage, I'd sell 'em - PM me.

Then you're looking at real sliders. The Slee Slider Steps are the only ones that offer a semi-disguised slider look with excellent strength and protection. There are several other slider manufacturers to consider, but they will be more towards a hardcore slider - I don't know of any cosmetic-only nerfs for the 80.

Manik makes them, search their site.

ARB side steps are available with or without the fender rails like I have. Not too expensive , good step, moderate protection for the non rock crawler type. Check with your local ARB distributor.

So, you have nerf bars, you are happy with nerf bars, and you don't want sliders? Yet, nearly all those who replied are trying to sell you sliders or factory steps.:rolleyes:

I've seen the manik ones on a landcruiser and they looked nice. I may get a set to make it easier for my kids to get in the wagon.

So two recommend sliders and two recommend "step" bars and one for factory boards...hard sell on sliders. IMHO the Manik's are fugly, but to each their own, the ARB's would be a good choice for steps.
 
Jobber(if you can find them at price) for the arb steps is $514.30.
Slee sliders are around $800.
Manik step are around $180.


There is no reason to buy sliders if you are not into rocks and heavy four wheeling. I guess they can make your truck look cool though.
 
Jobber(if you can find them at price) for the arb steps is $514.30.
Slee sliders are around $800.
Manik step are around $180.


There is no reason to buy sliders if you are not into rocks and heavy four wheeling. I guess they can make your truck look cool though.

I had Manik steps on my previous non-Toyota SUV. I had to replace them after less than 3 years due to rust issues (in a state not known for rust). The second set was starting to show signs of rust when I sold the vehicle less than 2 years later. The OP doesn't say why he needs to replace his nerf bars but if it is due to rust issues then replacing them with the same/similar will likely result in the same issue some years down the road.

Replace a few sets of "nerf bars" due to rust and suddenly the cost of a set of sliders doesn't seem so bad...and that is before you consider the additional benefits beyond rocker protection from rocks...And yes, they make your rig look cool...Is there a problem with that?
 
I had Manik steps on my previous non-Toyota SUV. I had to replace them after less than 3 years due to rust issues (in a state not known for rust). The second set was starting to show signs of rust when I sold the vehicle less than 2 years later. The OP doesn't say why he needs to replace his nerf bars but if it is due to rust issues then replacing them with the same/similar will likely result in the same issue some years down the road.

Replace a few sets of "nerf bars" due to rust and suddenly the cost of a set of sliders doesn't seem so bad...and that is before you consider the additional benefits beyond rocker protection from rocks...And yes, they make your rig look cool...Is there a problem with that?

The manik warranty is five years.

Buying a set of sliders and not using or needing them is stupid.
Take for example my landcruiser it is worth maybe $5000. I don't plan on rockcrawling or sustaining major damage to the rocker panels. It would be stupid of me to pay $900 for a set of sliders including shipping (approximately 20% of the value of the truck) just to look cool. Maybe, if I could get a used set for around $450 I'd do that, but not full price.
 
Last edited by a moderator:
The manik warranty is five years.

Buying a set of sliders and not using or needing them is stupid.
Take for example my landcruiser it is worth maybe $5000. I don't plan on rockcrawling or sustaining major damage to the rocker panels. It would be stupid of me to pay $900 for a set of sliders including shipping (approximately 20% of the value of the truck) just to look cool. Maybe, if I could get a used set for around $450 I'd do that, but not full price.


Nice to see you haven't change...Still an...nevermind...Lets just say you are one of the few on this board that has "issues" with being civil with your disagreement of other's views.

Manik replaced the nerfs under warranty so no I wasn't out the $$ for the second set. I WOULD have been out the $$ for the second time however as per Manik (at the time at least) they only replace the initial set under warranty. That said, I would NOT go through that hassle again because they were anything but reasonable about the issue and it was a royal PITA to get them to warranty the bars which required taking pictures, waiting, waiting, returning the bars where I purchased them from (luckily it was local), and waiting for the new set to arrive. Start to finish it took about 3 months and countless hours of my time.

To the original poster I apologize for getting off topic on your thread and wish you the best in finding nerf bars that will work for you!

Manik and Westin are the two companies I know of that make nerf bars.
 
Last edited by a moderator:
Nice to see you haven't change...Still an...nevermind...Lets just say you are one of the few on this board that has "issues" with being civil with your disagreement of other's views.

I don't care what you put on your truck. I just think it is stupid for a bunch of people to "armor up" and all they do is cruise at the mall.:rolleyes:

You should have mentioned that manik replaced the first set under warranty in your original post. Suddenly a few sets of bars only costs around $400. Maybe 6 sets of nerf bars would be what a set of sliders cost. After the second set (if they wouldn't cover under the warranty) I'd go to work with a wire brush and some spray paint.
 
I don't care what you put on your truck. I just think it is stupid for a bunch of people to "armor up" and all they do is cruise at the mall.:rolleyes:

Not sure why you say this without knowing people. Corsair23 is in my local club and he wheels his truck in the rockies and in Moab.

The armor has saved significant body damage and why club runs on trails like these are of no concerns. Do you wheel your truck?

attachment.php
 
Not sure why you say this without knowing people. Corsair23 is in my local club and he wheels his truck in the rockies and in Moab.

I didn't say that corsair23 didn't wheel his truck or even need sliders.

Most people do not need sliders including the person who started this thread.

I consider my landcruiser a mall cruiser. Although I do have an annual pass to the OHV trails at LBL Turkey Bay and have run a lot of the trails including the blue ones. I don't do big rocks and am careful.
 
Back
Top Bottom