Nerd seeks Gear Head advice..

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 29, 2015
Threads
2
Messages
5
Location
Golden Valley, Arizona
output_Ib6x3M_zpso7afjyqn.gif


Hello Folks!!

Got a 85 Land Cruiser here that needs some love and I need some solid advice on wtf is best.
20150419_155929_zpsbxfwdhzk.jpg


Every FJ has a story and here's this one. Ive been married now for 5 years. Never gave this truck much thought as it sat in the yard. Parked 7 years total.
20141231_194647_zpsablbna64.jpg


Not because it wasn't cool, but because of the emotional toll. Even mentioning it brought tears to everyone's eyes. You see, my wife was a widow, and he was driving this truck when he was murdered. The kids are growing up. We have become grandparents, and bought a house up against BLM land in the desert here. Life is moving on. Our middle son will get his permit in a month I want to teach him to drive stick in this truck.

She was rebuilt in Lake Havasu about 7 years ago and then shortly thereafter tragedy struck. About 3k miles were put on it before the long park happened. I should have done some maintenance but I am a computer guy. Built my son a nice 8 core rig couple of weeks ago, fastest pc in the house now.

I could not believe she fired right up. We drained the tank twice but there was still, i believe the technical term is "gunk" spewing out so i changed fuel filters a and the quantity decreased.

With all this desert right behind me how could we not cruise around?
20150419_155856_zpsv3qtbec3.jpg


My buddys son said look theres a street sign!! sure enough in the middle of nowhere..
20150419_153034_zpsjktrstvo.jpg

there was a trail in a wash where we can from ....

So she could get up to any sort of speed with those tires and having thought the it was all somewhat ship shape I got tires.
before..
20150807_112337_zpsvojev2c0.jpg


during.. these tires were 33 9.5 R15. the learning curse on this truck has been steep.
20150813_105741_zpslk3qauz4.jpg

this is what they did to the knuckle thing..
20150813_105803_zpsi03twiwb.jpg

these were way to wide at 8 inches and pushed right up to the boot rubber thing..
20150813_105518_zps7v7bbgoy.jpg

so i went with a 16" Pacer rim with Summit 10 ply Mud Hogs.. LT235/85/R16.
20150813_110059_zpsniwauaq4.jpg

it has a cool old school look.
20150813_161444_zpswvbohvyc.jpg

so naturally, we took of in the desert once again..
20150818_135417_zpsu5kwpevy.jpg

20150818_142115_zpsgfwp5bdk.jpg

20150818_140101_zpszgjxx4wi.jpg

just Cruising as she was meant to...

Then.. on the way up to the High School on Route 66.. the top end of 3rd gear started sputtering.

Found many good threads on here. Seriously helped a lot. Tried to get here going with a new fuel pump and it was defective. Put in the old one and realized it was the intake stuffed with gunk.

20150830_115222_zpswyzr6sem.jpg


now honestly.. i read power value this and jet that.. or floater bowl.. i tried everything then staring at the book noticed a filter past the little needle point above the bowl.

so after three days of minimal intrusion into the top horn.. I pulled it out.

this is the first time ever attempting something like this. Blood, 100 degree desert heat sweat, & what I will call misty eyes to save face, were shed.

I pull things off that are seriously out of my depth. I only broke a few vacuum hoses.. the grouping of four in the back.. i can fix that..

what i found was no gasket under the base onto the intake manifold. A dry dust covered oil leak that covered the carb and had seeped under what i came to find out is the vacuum screw bolt on the base.
20150902_101600_zpsmmqaoxwb.jpg

and its plugged right there? whats up with that? if the vacuum wasnt even going through the carb whoever rebuilt this plugged up the EGR off the carb with a shiny new ball bearing?! so all those 30 dollar dew hickys cant perform. i checked them for nothing. wasted days right there.

i did check all the smog stuff. all good. every one of them. Got the 81 emissions booklet.

so here I am. i cant get the last middle brass bolt out. I cant get the brass float needle housing thing out.


now, i did find cruiser parts with a oem aisan carb to exchange mine with and am staring at a pile of stuff with these to dam bolts i cant get out. so i didnt order the rebuild kit.

i did watch the pinhead rebuild video. I was going to get a keyster & a hygrade .

these boards have been a wealth of info.

now I am trying to be the calm within the storm..
output_3GnamG_zpsiew1coyx.gif


alright, so all advice would be cool.. theres plenty of advice.. its the why thats bugging me.. not necessarily the how.. ok the what is annoying. I do not know what much of the options are that have been developed over the years .. or why..

why is that hole plugged and does that mean someone had an aftermarket carb on it before then reverted it back?

what would be the best aftermarket carb.. within say $300? oh yeah, that i can do myself.
what else must i do if i upgrade?

what is the CFM of the stock aisan carb?

it seems to be a domino effect when people say, oh do this.. but then you have to so this.. then this..
well what step is first? and why.. obviously the carb now.. what i would not like to happen is upgrade or fix.. then the next system is over worked & breaks.. lol..

i think i might boil the gas tank. i heard thats a thing.

this ship will sail again..
output_InlL2r_zpskp0ajltn.gif

there are deserts to be explored.. i heard about a waterfall in the Black Mountains. I am about 20 miles from Oatman gold mines on route 66.

must. cruise. land. in. land. cruiser.
 
Greetings to MUD.
That was quite an introduction (in a good way).

I'll give you credit for diving into the carburetor at first whack, as it probably requires the most expertise and experience of any other part on the car. There are lots of ways to screw it up.

With that out of the way....

The carburetor base on the intake manifold (that black thing) is supposed to look exactly like that. No gasket goes on top of it. And yes, that brown bump can form. It is not a breather hole.

Whenever an old carburetor sits ( for 10 years) it tends to gum up and not work like it should.

The carburetor really should be rebuilt by an expert who knows these carbs, or swapped with an already rebuilt one you can purchase from a land cruiser vender.

You can try running a bottle of Sea Foam through the fuel system. Many guys have had good success.

But the secondary diaphragm (which opens the secondary fuel circuit when you floor it) is probably shot after 30 years, so a bottle of Sea Foam will only get you so far.

Keep the Aisin carb.
 
Cool story...your a good man.

Weber carb... yuck!!

I bought mp-cude's truck that he put the weber in... truth be told, it ran like s***. Couldnt get it right... hated it and the hackery. But it now has a LS swap :)

Welcome to the addiction!

Send the OE carb out for a rebuild to one of the gurus on this board...
 
I have a desmog'd 60, with a Weber. Keep the aisin....


Also check out your TREs and drag link.
 
X3 about keeping the stock Aisin carb and sending it to an experienced Land Cruiser specific shop. Lots of other less finicky things to repair on your Cruiser.
 
I'll say this,...watch Pin_heads videos and read the FSM and rebuilding a carb really is just step by step disassembly and cleaning. 8 core motherboards and whatnot, you prolly got this...once you get it back together and back into the rig, you can baseline the carb, timing and check for any vacuum leaks. you might be redoing valve seals before too long for the long sit, and a valve lash is a must after that period of time. good on you for giving you step son and his cruiser a second chance...
 
Hello all and thank you for your replies!!

at first these boards posts seemed a little older and maybe not that active but I now know that's just the time frame when working on an FJ ..

Ive had to look up a few things you guys have suggested..

so being a southerner, channeled my inner redneck out and this happened..
20150903_201342_zpscinbjvoj.jpg


so the screen on the float needle was clogged.. got the biggest screw driver at true value to get that thing out..

20150903_185950_zpsslojuryb.jpg

20150903_183346_zpsaouolay3.jpg


jacked up the float spring.. had to cut it. used 7 matches taped together to get 7mm and a single one to check the clearance. Fuel can be seen halfway through the glass..

the gasket is a puzzle of original & 12pk cardboard.

the secondary diaphram is now a 4" sqaure of rubber from a flat on my bike..
20150903_181540_zpsoadr1bkr.jpg


what else.. well i did the Australian mod from this guy


20150903_201127_zpsefaqlowh.jpg

20150903_201147_zps2ejtuc9z.jpg

i may open up the inner brass tubes oh so slightly and put them in...
cause with out the egr going I am just eating gas.. but shes powerful.. and the gas pedal is nice.. although the plunger is jiggly.. i think this is why its so hard to start in the morning.. its not even cold here yet..

i will say that linkage from the pedal is dangerously close to the carb mount. i know it could come loose but if even a twig gets in there the throttle would be stuck open with a mm of clearance..

i need to follow the speedometer cable to see whats up with that..

other than that shes idling about 750rpm and the choke is adjusted to 1600rpm.. smooth at 60 according to some speed app i got..

was able to cruise around on Labor Day with some friends and had a bon fire..
i would like to take that hill someday...
20150907_184641_zpstvpslm1a.jpg

we were waiting for something to break but she held..
i probably should recheck these lines..
20150830_114715_zpsyomn2b9b.jpg


went around the block this morning.. through a few washes like that in the back ground no problems.. it would have been a hassle of a walk back in flip flops..
20150908_095258_zpsnc7fwtof.jpg


Conclusion..
I was going to get a rebuilt Aisan but now I think the Hygrade 791b kit with the secondary will work. Ill order it this friday & replace everything.

redneck fix achieved. permanent fix incoming..

now.. whats up with my ac? :wrench: ;)
 
Quote of the week:
"must. cruise. land. in. land. cruiser." - Reeferman

You have more courage than most to dive into the carb. Good on you, and that is a mighty fine rig you have. These things take time. J
 
Congrats on getting her running again. Thanks for saving her!
 
Back
Top Bottom