Need some help diagnosing a problem...

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

OK. I've restored my sanity today with the following activities:

2 hour workout ride on the peaceful and serene Idaho backroads. Birds chirping, wild turkeys strutting about, one small yappasaurus dog given a glancing blow with the pedal.

2 hours at the shooting range getting ready for this weekend. Went through 200 rounds in my gun, then shot a friend's NAA mini revolver, his Blackhawk 44mag with overpowdered handloads, and then rented the range's full auto MP-5. Other than a couple powder burns on my cheek (bounced powder off the range's side panel!!), it was a rockin' good time.

So, I'm all better now :-)

Blast - sounds like you got lucky. If the hose tore/blew, then nothing had time to get too hot before drive was lost. Just fill 'er up and drive off. Might consider doing a 'service fluid change' on the tranny in a month or so. Also suggest using Toyota matched belts (unmatched aftermarket belts fight each other and overheat) and confirming belt routing as some have put the belts AROUND the idler pulleys instead of against them.

DougM
 
Doug,
Glad to know your okay, now eat some more Almond Toffee:)
 
OK. I've restored my sanity today with the following activities:

2 hour workout ride on the peaceful and serene Idaho backroads. Birds chirping, wild turkeys strutting about, one small yappasaurus dog given a glancing blow with the pedal.

2 hours at the shooting range getting ready for this weekend. Went through 200 rounds in my gun, then shot a friend's NAA mini revolver, his Blackhawk 44mag with overpowdered handloads, and then rented the range's full auto MP-5. Other than a couple powder burns on my cheek (bounced powder off the range's side panel!!), it was a rockin' good time.

So, I'm all better now :-)

Blast - sounds like you got lucky. If the hose tore/blew, then nothing had time to get too hot before drive was lost. Just fill 'er up and drive off. Might consider doing a 'service fluid change' on the tranny in a month or so. Also suggest using Toyota matched belts (unmatched aftermarket belts fight each other and overheat) and confirming belt routing as some have put the belts AROUND the idler pulleys instead of against them.

DougM

Yes, it has been filled up and driven off, goes in tomorrow for some new coopers. Dodged one there. Good point on the Toyota belts, will contact CDan and get that done.

What are you shooting this weekend?
 
So to summarize, your belt shredded cutting into your tranny hose dumping the fluid. The lack of fluid made it non driveable. (to help the later searches)

I think folks were a little hard on you, but more info would help next time. I was wondering if this happened once or it was stuck and not movable. I was wondering If she tried shifting the Tcase or tranny. I was wondering if she could shift it out of park. I wasn't wondering if there was fluid underneath, but that would be a good one. I also was wondering if this happened while driving, from a stop or just when she started up.

The above isn't a ding but will give others something to think about when posting problem threads.

I know TS with a wife on the phone that isn't always possible and I feel your pain. In this situation you could say that the wife isn't able to give me more info at the moment and I will post more up when she calms down and stops yelling. Most married men would understand that.

Glad it all worked out fine for you.
 
Blast - It's our annual required Search and Rescue shooting qualification. Inevitably, it turns into a bit of competition and I've been top dawg on score for many years, so will be defending my record. Frequently, people go back to their cars, pop trunks and all manner of wild stuff starts throwing lead down range after the formal part is over.

Glad all turned out well, and Coopers are a good call. The S/T is a perennial favorite of mine.

DougM
 
So to summarize, your belt shredded cutting into your tranny hose dumping the fluid. The lack of fluid made it non driveable. (to help the later searches)

I think folks were a little hard on you, but more info would help next time. I was wondering if this happened once or it was stuck and not movable. I was wondering If she tried shifting the Tcase or tranny. I was wondering if she could shift it out of park. I wasn't wondering if there was fluid underneath, but that would be a good one. I also was wondering if this happened while driving, from a stop or just when she started up.

The above isn't a ding but will give others something to think about when posting problem threads.

I know TS with a wife on the phone that isn't always possible and I feel your pain. In this situation you could say that the wife isn't able to give me more info at the moment and I will post more up when she calms down and stops yelling. Most married men would understand that.

Glad it all worked out fine for you.

As the story is told, she was just driving down a country road near our home, revs shot up and truck wouldn't pull.

I re-read my first post and it was awfully light on facts. Impossibly vague, really. Of the many things I thought might have happened, a belt breaking and cutting a hose was not one of them. Start carrying hose and fluid in your kit. Odds are probably a million to 1 of it happening, but if it does you won't move far.

Doug, I have had great use from the Cooper S/T 10 plys I put on these LC's. Good tire.
 
Wow - 10 ply. That's a stout tire and what the Forest Service and a lot of loggers and others who work in the wilderness use. I have the D rated version, which I think is an 8 ply. Even these make for a jiggly ride. I run them one size smaller (265/75-16) than stock for good freeway stability, slush/snow penetration on road, etc. Once accepted a challenge from a buddy in mud who'd just put the well respected Interco Super Swampers on his truck and was surprised I got higher up the hill than he could (both unlocked). Definitely not going to happen in all mud conditions because the SSR is a dedicated offroad tire, but impressed both of us.

DougM
 
I use that same size. Most of my off-road use is in the woods and with the honey locust thorns, nubs of down limbs, or cut sapling stumps the 10 ply have held up very well. You do trade off highway ride comfort though. I have been impressed with them in mud and snow and just the mucky stuff you get in the woods after you get beneath the leaves.
 
This thread really underscores that old Kepner-Tregoe Analytical Trouble Shooting (K-T ATS) class taken ages ago...

Look at what recently changed, what has not, which is a likely cause, which is not.

That fan belt redundancy is not something to think you could drive months on end with only one.

That was the "what changed" and it was the root cause. (And yeah, hard to discern from a phone call that the ATF was fully and wholly dumped...)

The other lesson here: Buy your replacements from CDan.

When I bought my truck a couple summers ago, after lurking here for a while...first service? Belts! I wanted a secure a/c compressor belt, and I wanted two good ones driving the 8 year old (now TEN!) water pump.

Ultimately, not a crappy outcome, and a couple of good lessons learned. (Three, if you count using the appropriate MUD/IdahoDog approved "Problem Description Template" for troubleshooting/crystal ball gazing purposes. :grinpimp: )

Hope :princess: trust in the truck is maintained!

:cheers:
 
Odds are probably a million to 1 of it happening, but if it does you won't move far.

Actually, the odds are MUCH less than this. Yours makes the 3rd time that I have heard and seen this exact same thing. The ATF cooler lines run very close to the path of the alternator belts. When one breaks, it can get tangled up with the other belt and will thrash around under the bonnet for a short while.

Glad it turned out to be something minor.

-B-
 
Back
Top Bottom