Need help getting home

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
May 19, 2011
Threads
20
Messages
507
Location
Texas
Me and the wife are in Europe and our rental car was broken into. The backpack that had the keys to my Cruiser are now gone. :(
I have a spare key at home but not a fob. We don't get back until Friday and the Cruiser is parked in Dallas which is still another 5 hours from home.

Even if someone gets me the key, how do I deal with not having a fob so we can get home?

:beer:
 
What is the fob for? Mine only takes a key.
 
To lock/unlock it. If I just use the key to get in the alarm goes off.
 
Unless I'm wrong, I didn't think it worked like that. Wouldn't the key fob be needed for the immobilizer?
 
1. Find a way so the key will arrive and wait for you at the airport
2. If you know the name of the fob manufacturer contact them and ask for advice
3. Most of antibergular equipment manufacturers have filed technicians

If it was in Israel I will bring my local car thief to break in once I locked my keys in the car it took him 45 seconds
 
If it is a factory alarm, it will disable with the key in the DRIVER's door lock.

If it is aftermarket it MAY disable with the key in the drivers door lock. Otherwise, use the valet button to temporarily disable.

You sure as heck should be able to drive your truck when all you have is a key.
 
I lost my fob and keys once (factory alarm). Took the passenger side door apart (30 minutes) to get the code on the tumbler, new key was made in 5 minutes. Alarm was still doing its thing but didn't stop me from using the truck. I live in a rural area so I just never shut the door fully or would leave the back unlocked.

Got an ebay fob for $20, an hour of futzing and I got it working. Woot woot.
 
Doesn't help you now (maybe), but I just had new keys cut for my new two 80's, from the VINs. I kept the keycodes for future insurance. Any dealership should be able to get the codes for you from the VIN for you and cut good keys.

As has been said above, if the alarm is the port-installed POS, the master key in the driver's door will disable it; it's a simple bypass anyway. There should be an on/off toggle switch on the driver's kickpanel, or behind it, hanging from the wiring harness (if the PO got tired of switching it on with his foot as he got into and out of the truck). If it's an aftermarket alarm, you may need beer.

My dealership insists on proof of ownership (title, registration, something like that) before they'll issue the keycodes to the parts clerks and then they have to get the parts manager's personal approval via their online order system. There are few things the dealerships are good for, but this, IMHO, is one of them.
 
If it is a factory alarm, it will disable with the key in the DRIVER's door lock.

If it is aftermarket it MAY disable with the key in the drivers door lock. Otherwise, use the valet button to temporarily disable.

You sure as heck should be able to drive your truck when all you have is a key.

Yeah, it's a factory alarm. Maybe I'm doing something wrong, but when I just use the key the alarm goes off as soon as I open the door. Never tried to start it though since all I can think about is trying to get it to shut the hell up!
 
I bought my lexus with out a key at a towing sale. I had a key made off of the key code. and I bought a fob a few weeks later. and I had to program it to make it work, but I was driving it long before I got the key fob.
 
Yeah, it's a factory alarm. Maybe I'm doing something wrong, but when I just use the key the alarm goes off as soon as I open the door. Never tried to start it though since all I can think about is trying to get it to shut the hell up!


Typically, place it in the lock and click it two times to the right (CW) and it SHOULD disable the factory alarm. Then open the door and it shouldn't go off.

If it does, then pop open the hood, and disconnect the battery for 3 minutes.

Reconnect the battery and everything SHOULD be fine.

Drive it home and disconnect all the harnesses and reconnect the main harnesses (takes about an hour) so the system if completely bypassed. It's fairly straightforward. Just find the harness under the driver's seat and follow it into the DS kick panel then under the dash.

You will need screwdrivers, (phillips and straight), a 10MM metric wrench (and/or nut driver / socket), a pair of needle nose pliers, and a 14MM wrench (to remove the driver's seat if desired.)

I had my alarm go wonky when I was picking up dinner one night. I have NEVER owned a FOB for my truck. I came out of the restaurant and my parking lights were on. I opened the door and the alarm went off. I tried to start and it wouldn't. I tried the key in the door and it wouldn't. So, I popped the hood and disconnected the battery (fortunately, I had a few tools with me) Other than looking like I'm stealing my own truck, it's just annoying listening to the alarm while unhooking the battery.

Good Luck!
 
Yeah, it's a factory alarm. Maybe I'm doing something wrong, but when I just use the key the alarm goes off as soon as I open the door. Never tried to start it though since all I can think about is trying to get it to shut the hell up!

If factory alarm, when/if it goes off upon opening the door, insert the key into the ignition and turn it to the on (not start) and off positions twice and then start the vehicle, the alarm will stop.
 
Back
Top Bottom