Need advice upgrading suspension

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jun 12, 2007
Threads
15
Messages
138
Location
SoCal
Hey guys, first time posting. Finally got my '97 80w/locks. Life is good and I can finally sleep in peace. :D I want to install OME suspension, but not sure whether to go with med or heavy. I'm getting the ARB winch bumper but the winch will have to wait for a couple of months along with the HQ rear bumper. So, in the mean time, how bad will the ride be with just the front bumper and OME heavy suspension? I figure I can weight the back down with something until I get the rear bumper.

Thanks for any advice.
 
Is nobody brave enough to take this one on? :flipoff2:

Take a look in the FAQ or give Slee or Cruiser Outfitters a call if you want to do an OME kit.
 
I just built mine last month and had great help from both Slee Offroad and OME for help over the phone after reading a lot of everyone's articles. I ended up buying from christo at Slee Offroad.

I bought their 4" kit w/850/863 J springs instead of the higher spring rates. Reason for this is that I wanted to start off with the softest spring rate available and then if I didn't like em I could go with the stiffer 4" later for about $200.

In the last 4 weeks I have spent 9 days in Moab, Utah and 4 day trips in southern az on the Charouleau Gap trail with only great things to say about my suspension. plush, good flex with only the ft sway bar connected.

I'll see what it's like after building a winch bumper, rear bumper w/tire carrier later this year. Hope this helps
 
I have heavy springs front/rear with no armor at all, just a constant load of ~75lbs in back. Works just fine for me, I wouldn't worry about running it for a while before you get the rest of your armor.
 
im running ome heavies front /rears with a front bumper no winch, but i do have cargo drawers full of tools. i have no problems. i like the ride better than stock.
 
Back
Top Bottom