Mud Flaps

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 12, 2006
Threads
164
Messages
1,226
Location
Ladner, BC, Canada
Website
www.lentelconstruction.com
So I have been without my mudflaps for a couple of years now. One rear ripped off on a wheeling trip so I removed the rest (and added sliders). I would like to throw on some 'soft' flaps that will bend if they take a hit. As far as I know, in BC we technically need to have the top 50% of the tire height covered by flaps. I haven't had an issue with it yet and don't want to in the future.

Anyone hear find a good fitting soft style mud flap for an 94?
 
Interested in the same for my '97 that is deflared. Subscribed

sent from space or some crap like that.
 
Interesting timing - I'm here in WA state & rolled away from a state trooper stop due to me not having flaps - technically according to WA law, your car has to cover the centerline of the axle in the rear - my Hanna bumper obviously doesn't.

I just plan to use some sheet rubber or whatever I can find in the shop, then use machine screws so they tear away at the slightest rub rather then thru-bolt & bend and create work for myself involving the wheelwell metal.

Stater was cool, he knew me (small town) & said they were looking for excuses to pull people over, to raise funds. He glossed over the fact he did catch me doing high 60's in a 45 zone when I waved at him - hey, I speed, but being honest goes a long ways in a stop.

I do plan to add some sort of nod to flaps soon, as since they gravel the roads (we either gravel or salt-substitute here in WA), we all will be flinging that stuff at the passenger cars.
 
I saw an 80 recently with modified factory flaps. The flaps were cut about 1/2 way down then holes drilled above and below the cut line and reattached with black zip ties so they would just hing back and forth if caught on anything. I think that is the easiest solution and I plan to do that to mine.
 
I saw an 80 recently with modified factory flaps. The flaps were cut about 1/2 way down then holes drilled above and below the cut line and reattached with black zip ties so they would just hing back and forth if caught on anything. I think that is the easiest solution and I plan to do that to mine.

This is a great idea! And I love mods that cost $0!
 
Pretty neat idea plus I'll find any excuse to use zip ties.
 
That's an awesome idea! I'm gonna do that on mine too, having just had to stick one back on after tearing it off the other day...zip ties! The second greatest thing since sliced bread!
 
I saw an 80 recently with modified factory flaps. The flaps were cut about 1/2 way down then holes drilled above and below the cut line and reattached with black zip ties so they would just hing back and forth if caught on anything. I think that is the easiest solution and I plan to do that to mine.

I fail to see the charm in cutting a 90 dollar mud flap in half, but that's just me.
 
Since I put the wings on I've been thinking of something to use as a replacement for the factory flaps which still bolt up but look ridiculous with the big cutout for the stock bumper in them. Something like these Surf flaps might work.
 
Since I put the wings on I've been thinking of something to use as a replacement for the factory flaps which still bolt up but look ridiculous with the big cutout for the stock bumper in them. Something like these Surf flaps might work.

Pretty expensive to pick them up from Vancouver. :hhmm:
 
I just pulled that pic off the web as an example but yes, they are pricey for sure even here in Japan. Anything JAOS is stupid expensive. Something like them would be good though.
 
I fail to see the charm in cutting a 90 dollar mud flap in half, but that's just me.

I too fail to see the charm in that, but see less charm in my ripped off mud flap that got caught between my tire and an obstacle when backing up;)
 
Last edited:
Back
Top Bottom