More mystery behaviour....

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jul 3, 2006
Threads
259
Messages
1,935
Location
Fort Apache: Victoria
So yesterday I was driving downhill at about 30mph. I made a gradual turn left, and the truck stalled. I quicky threw it into neutral and started it, threw it back into gear, and it ran fine the rest of the day.

Today I made a left turn and half-way through, the truck stalled. Neutral, start, back into gear and it ran fine.

Later today, same thing.

I'm still having speedo issues, but the speedo and the stalling don't seem to be related to one another.

Coincidentally along with this new behaviour, I notice the idle is low (around 300rpm), and, even weirder, my CEL, whaich has had a code 71 on it since day one despite my cleaning the temp sensor, has now gone out.

Ghosts, man.

I think there must be something grounding out somewhere, but where?

It's been raining here lately, so it's a safe bt that some things that have been dry for a while, are now wet, ie the harness from the t-case to the ecu.
 
Indeed, there must be a short in the harness or something up with the ECU.

Can you pull the plugs at the ECU and use a FSM/EWD to check the harness for abnormality?
 
Sounds like a fuel filter or PCV valve to me. Both are realively in-expensive. The PCV valve is easier to get to.

Could be something else, but sounds fuel related and those are the two easy things to work on.

Other possibilities area vacuum problem. Check your hoses for cracks and breaks
 
Sounds like a fuel filter or PCV valve to me. Both are realively in-expensive. The PCV valve is easier to get to.

Could be something else, but sounds fuel related and those are the two easy things to work on.

Other possibilities area vacuum problem. Check your hoses for cracks and breaks

I agree with the above. And don't forget the big hose from the air cleaner to the throttle body.
 
I think your truck is a female, yah, I'm pretty sure.

I had this girlfriend once who did that. I never could get the problem fixed, and ended up trading her in for a newer model.

I sure hope you don't have to resort to that..
 
You should have just stopped turning her to the left. :lol:

Hey Yuppy, you could just be anti-NASCAR and only make right turns...:D

I couldn't help it, that was her best side, if you know what I mean.
 
Sounds like a fuel filter or PCV valve to me. Both are realively in-expensive. The PCV valve is easier to get to.

Could be something else, but sounds fuel related and those are the two easy things to work on.

Other possibilities area vacuum problem. Check your hoses for cracks and breaks

I agree do both and while doing those look at the hoses

John
 
Get this...


My head-unit's amp packed it in last night... so I took it to the shop to get a repair estimate (it's 13 months old, of course :rolleyes: ). Turns out it was going to be +$100, so I bought a used high-end model with 8 months left on its warranty, for $110.

Anyway, I installed the replacement stereo, and took the truck on a long drive in the rain. It (the truck) is working perfectly. No CEL, no idle issues or stalling or anything.

I'm going to check all the hoses in the daylight, but you know what they say about it not being broke...
 
Get this...


My head-unit's amp packed it in last night... so I took it to the shop to get a repair estimate (it's 13 months old, of course :rolleyes: ). Turns out it was going to be +$100, so I bought a used high-end model with 8 months left on its warranty, for $110.

Anyway, I installed the replacement stereo, and took the truck on a long drive in the rain. It (the truck) is working perfectly. No CEL, no idle issues or stalling or anything.

I'm going to check all the hoses in the daylight, but you know what they say about it not being broke...

See, I told you it was female..:D
 
On one of my old cars I had the same issue happen a few times when turning it would shut off. Bad timing sometimes when it would shut off while turning and I would suddenly drift into on comming lanes. It was a fuel issue, but it was with a chrysler not a toyota but still the symptoms seem almost exactly the same.
 
My guess is you are grounding out the wiring harness next to the EGR pipe at the back of the engine. You need to look at this soon, if not you may risk melting the wrong wire and it will cost you a computer. What is happening is you are grounding out the wireing harness and it is reseting the computer(thus the low idle and the no cel light. If the harness at the back of the engine looks good, go behind the glove box and check out the wires that go into the computer.
later robbie
 
Back
Top Bottom