Missing engine plate?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 20, 2008
Threads
8
Messages
13
Location
San Diego, CA
New Poster; Long time reader. Newbe question...

I have a 97 40th ann and on wikipedia it says all 97's/40th's are FZJ80s. I have been interested if this is true. Looked around for some info, couldnt find anything (even when searching and FAQ but who knows, i could just be sllllooooowwwww....) Anywho, I went to go look at my engine plate and couldnt find anything on the firewall, then i noticed these 2 empty rivit holes and was wondering....... Am i missing my engine plate? how can i get this info without it? i have heard about looking up the VIN number but am not sure how... :doh:

Any patience would be appreciated.

-Murph
engine bay 001.webp
 
You aren't missing anything. Look at your driver side door. Has all the info you want. And yes, a 97 is an FZJ80.

Once you locate your VIN plate (look on the dash near the windshield) go here:
http://www.decodethis.com/
 
I parted a 94 80 from Germany and it actually had the VIN plate on the firewall right there. I should have kept it. None of my 80s have had them. My 60 does though.
 
Most of the rest of the world still uses rivited plates and the firewall is set up to get one. North America gets the paper tags.
 
Back
Top Bottom