MetalTech Spacers Questions

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
May 27, 2006
Threads
52
Messages
940
Location
Tempe, Arizona
I ordered the 2" spacers about two months ago and have had them sitting around since...
spacers-1.jpg


What will the negative effects of installing these be? I'd imagine that caster will be even more negative but other than that I don't know.

With these can I take 2" of bumpstop off since I'm spacing the whole spring down 2"?

Are these going to make the truck ride stiffer? I don't see how but I've heard it mentioned before..
 
Where are you now with the suspension?
OME Medium kit, haven't pressed the bushings yet. The front sits about 1.5" lower than the rear. I'm almost tempted to not go to the trouble but the stinkbug is getting to me. Especially after a Toyota salesman walked up to me and asked what was wrong with it while I was picking up an OEM air filter. Embarrassing. :mad:
 
Your caster will be worse, I had to use Slee plates to fix mine. Then, with those on my tie rod hit my control arms, so I had to grind those. And finally, may just be with my J springs, the bump stops were hitting the springs, so I had to remove those and use the frame mounted ones from a 93.
 
Your caster will be worse, I had to use Slee plates to fix mine. Then, with those on my tie rod hit my control arms, so I had to grind those. And finally, may just be with my J springs, the bump stops were hitting the springs, so I had to remove those and use the frame mounted ones from a 93.
Did your ride quality change at all?

I probably shouldn't bother until I move to 35 or 36's anyway.
 
Back
Top Bottom