Measurement request!!!

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 26, 2005
Threads
474
Messages
4,670
Location
Oregon
I am working on my 64 project and need a measurement taken.

I replaced the glove box floor, and no longer know where to bolt up the glove box door.

As some of you may know, the glove box door on an early rig has three bolts on the inside floor of the glove-box for mounting.

I need to drill new holes for the glove-box door. I need measurements from the inside front edge (or outside) and measurements from the side wall.

I hope that all made sense.

Thanks!
:beer:
 
43EE04E9-C817-4842-BB5A-5ACB9760E5C9.webp
620D818E-9789-41C7-A67E-2B6B1C984BE6.webp
90026E6C-A8DD-4CC4-85E7-330523D75F38.webp
 
Thank you so very much!

Exactly what I needed!!!

:beer:
 
Back
Top Bottom