Master rebuild kit

[My wife said no FJ!]

Has anyone used, or anyone know, if the DORMAN master repair kit #TM351747, is the correct kit for the tin cup brake master?

Would I be able yo use this same kit in the clutch master??

 

[nuclearlemon]

no clue on the dorman, but if it's for the 1" it will work. yes, same kit for clutch as brake master, you just don't use all the parts in the clutch master

 

[D'Animal]

I'm having a very hard time locating the Dorman # TM351747.
Everyplace that lists them has them listed as NLA.

JPardi provided the B/Arnley number as well but I'm having the same No-Luck.

Does anybody have a good lead?

 

[pardion]

I'm having a very hard time locating the Dorman # TM351747.
Everyplace that lists them has them listed as NLA.

JPardi provided the B/Arnley number as well but I'm having the same No-Luck.

Does anybody have a good lead?

Dan, TOYOTA p/n 04311-60021 Might still be good? John

 

[hdjtachtig]

I thought Kurt sells those.

 

[pardion]

Dan, TOYOTA p/n 04311-60021 Might still be good? John

04311-60021 no good no more, John

 

[D'Animal]

My local Toyota dealer could not find the Toyota part number.

 

[cruiseroutfit]

I thought Kurt sells those.

I'm 99% sure we have a rebuild kit that fits the early tin-cup stuff, in fact if it is the same as my 65 era 45 tincup cylinders than I am 100% sure we do

 

[D'Animal]

Kurt, cannot find them on your website.

 

[pardion]

Dan did you take your Brake MC apart yet? In looking at the kit I have the consumable's are 1-1" cup and 1-1" cup with center cut out. $5.00 or less in parts. John

 

[D'Animal]

I was able to get one nut off, with a little heat and big wrench.

The other would not budge so it is soaking in BP blaster.

 

[cruiseroutfit]

Kurt, cannot find them on your website.

Sorry, updates have been slow to the old site as we are working on a new one. It likely represents 30% of our stock

Give us a buzz at the shop and we can easily look it up!