LX450 CD changer wiring question

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Nov 16, 2006
Threads
82
Messages
2,104
Location
Aspen, CO
I'm installing the LX's CD changer (w/ head unit) in my 80. I have all of the wires spliced in except for one. I've attached a picture of the wiring diagram page with the wire in question circled in red.

It is labeled "ILL+" and it says that it's lead comes "From 'Tail' Fuse" and is a green wire. I have no idea what it is, of course, I'm not that bright when it comes to electrical diagrams and wiring. Definitely not my forte. As always help is appreciated. If someone needs to see the fullsize pic, I can email it.

hubnut 085small.webp

Thanks!:)
Nick
hubnut 085small.webp
 
Nice pic;)

I believe that that probably illuminates the eject button of the changer to facilitate loading a cartridge. I have always just reached around the back of the console and have never had any need for illumination.
If you want to hook it up, you can run a wire to the "tail" fuse in the fusebox to the left of the column and connect it with a fuse tap.

EDIT: Yep, that's what it does.
 
Steve, you always seem to be lurking at the right times!:bounce::bounce2:

Thanks again! I guessed it might have something to do with illumination (hence the "ILL" right?), but I figured I'd check with the LX dudes to find out for sure.

So I guess the question is, what is illimunated? Is it the eject button and the carcass of the changer?
 
just the eject button
 
Back
Top Bottom