LX450 20 Year Refresh

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Nov 1, 2009
Threads
35
Messages
1,701
Location
South Central PA
So my truck is 20 now and before it can buy beers, I decided it was time for a solid once over to hopefully keep it running for another 20 years or bury me in it, whichever comes first. This decision became much easier when my wife (love her to death) told me I couldn't have a new John Deere tractor with a loader on it.

It's a '97 LX450 with the factory gold package and bronze tint. No lockers. I am the 2nd owner and bought it in 2000 with 20k on the odometer. I currently has 272k on the odo.

In the 17 years I've owned it, it's been many things ... daily driver, part time delivery vehicle for work, winter only vehicle and firewood trailer hauler. It went through a phase in the early 2000's with chromed 22" wheels and the big stereo (basically the truck equivalent of a mullet), then into winter only mode as other summer sports cars took it's place.

I removed the chrome from the stock Lexus rims and had them powder coated grey to match the body cladding and trim and mounted some retread 33" mud tires from a vendor on the sight. Not sure if they are still here, but best purchase ever. This happened when the Michelin became replacements for a Ford tire (IIRC) that was being recalled and you couldn't find them anywhere.

In 17 years it has left me stranded exactly once. The starter motor became stuck and the starter gear would not disengage the flywheel. It's hard for my friends to truly grasp the level of confidence I have in this vehicle to get me where I need to be no matter where it is or what the weather.

This forum is a huge technical resource with MANY truly capable and knowledgeable members. As I go through this process, it is my goal to learn to do as much of the work as I can myself so I can know the ins and outs of the truck. I have some tech ability and have modded a few sports cars - V8 swaps, suspensions and such - but I also know what my limits are and have no problem paying a pro when I think its needed. My biggest issue learning from guys here on the sight vs other car forums I'm on is that much of the tech is written and I'm a visual learner. I need as many photos as possible.

I know how to use the search, but will still ask a bunch of noob questions anyway (first one coming soon).

The goal of the build (if you can call it that) is to clean things up and update things so the vehicle feels more current, stay stockish, but still allow the truck to be even more capable of handling anything. It's a bit of a shotgun approach to what gets done and when atm. Some things need to be repaired and others crop up out of starting one thing and it leading to another thing ... wait for it ... while I'm there.

Here are a couple pics of how it usually looked ... embarrassing pics of current look shortly.
 

Work truck status ... pulling my super hillbilly full pickup bed log hauling rig. Still had original stock suspension at that time.
 

So a few weeks back I was backing into the shed to put the truck away and somehow forgot I let a huge pry bar leaning against a ladder. Bumped a mini fridge with the tow ball, which bumped the ladder and knocked over the pry bar and POW ... a new window vent.

Was leaving out of town a few days later, so dropped it at the body shop to have the rust spot fixed while the window was busted and also had a spot on the door cleaned up. The vehicle is rust free otherwise. A project not planned yet, but check. BTW, if you have the bronze window tint, treat it as if it was gold, literal gold. Safelite told me there were 2 rear windows available in the country ... now there is 1.
 
I'll take stupid questions for $100 Alex ....

So I was beginning a lighting project that I will post pics of shortly. I removed the center dash cover around the AC, radio and such and got everything off (the AC plugs were freaking nightmares) except the connector for the security light. Somehow, I managed to get a piece of the unit off without undoing the connector, then was able to get the right angle to undo the harness plug. the issue I'm having is that for the life of me, I can't see how they go back together to put the red LED that flashes when locked back where it seems it should go.

Any help with this stupid problem is appreciated. I have some OCD about these things and everything should go back exactly how it came apart.



Maybe there is another piece that I pulled off and it fell into the dash area?
 
The powder coat on the wheels wasn't done properly, or so I'm told, there was supposed to be a primer put down to help avoid flaking. The step wasn't done and after 4 years the coating was coming off in large chunks both inside and outside the wheels. It got so bad that a few of the tires were losing the bead seal and needed air consistently.

Put on my super baller 22" chromes from 2001 and sent the wheels out for sandblasting.

Got them back and they are super clean now, but show some signs of pitting in spots.

The inner area where the bead sits seams clean on all 4, so I will remount the tires to them. I was considering powder coat again, but do not want to repeat that removal process if I want to change colors in the future. Liked what I saw here(Lets see those painted wheels) and will pursue this road since it seems easy and cost effective.
 
New rear window finally installed yesterday, so truck is road worthy again, but still has the old 22" rims on it so I feel ridiculous. I didn't realize how used to the hum of the off road tires I had become. Regardless, I took it to dinner last night and noticed an issue with the AC. I did searching but no luck finding the thread I saw a while back.

The AC blows super cold when sett all the way to cold, but if I move it just a hair to warmer on the rheostat, it blows what feels like full hot. Can someone direct me to a thread with a possible remedy please?

Also, if anyone has their dash apart currently, can you post a pic of what the back side of the security light looks like. I'm still trying to solve that puzzle.
 

This is where the rheostat cable sits at full cold setting on the dash. The cable isn't loose, but has a tad of slack. Is this where it should sit for that setting? I recall a thread I saw discussing this, but cannot locate it.
 
Reinstalled my rear wiper this morning. It has always worked, but never really touched the window much ... at all ... more like it just waved at the glass it as it was moving. Took the opportunity while it was off to pry it open a bit on the pivot shaft on both sides and hit it with penetrating oil.

Worked it back and forth on the pivot a few hundred times and now it finally snaps against the window as it should. Not sure what I'm more satisfied by, fixing this for $0 or fixing the lighter socket that was dead for 7 years for $0.

Off to Lowes for some Rustoleum primer and flat black to check how it looks on the stock wheels. Will have to spend some time with the shop vac removing chunks of flaked off PC from inside the tires as well.


Anyone know what removes Fix-A-Flat? I have 1 tire that is coated in it.
 
Finally found a few threads that helped me sort out the AC issue or at least made it so the instant heat stopped.

A/C Question...

Climate Control

I plugged the security piece back in as well now and it seems to function correctly again. Just realized from a google image search that the hose connects to this piece, hence it being needed to make it function correctly.


Still hoping someone can post up how the motor armature looks like on full cold so I can compare to where mine is sitting.
 
Last edited:
Head removed from ass ... solutions found. Pics to follow.
 
Last edited:

The hose slips over the Cabin Temp Sensor, mine wasn't connected previously. The sensor clips into the HVAC Controls behind the 4 vents on the bottom left.

Finally found the security LED and sensor buried behind the radio from when I had it out of the truck weeks ago.

Plugged back in and all is back to normal ... sheesh. I haven't even gotten to anything hard yet.
 
Definitive led thread for 80s

I read through this and a few related threads the past few weeks. I love the idea of changing the dash colors, but am very concerned with people saying the LEDs seemed to fail in a short amount of time. Thought I would try an alternate route since I didn't really want to make the dash brighter, just a different color.

I used the guide treerootCO posted and the same vendor he went through for the LEDs, but just swapped out for blue incandescent bulbs for the green ones and super white incandescent bulbs for the bulbs that were already white (idiot lights, turn signals, etc). I am really happy with the dash cluster results. The HVAC controls are a bit muted, but still look good at night. I did not swap out the green LEDs in the HVAC controls. It seemed like a lot of extra work atm.

If these bulbs fail in short order or if the blue blubs become white with time, I will try the LED route.


I will try to get HVAC control pics asap.
 
Hoping to get the ABS light sorted today. Had new suspension installed as well as new rear brake pads put on while they had it on the lift. Don't remember the light coming on when I left the shop, but it came on as soon as I replaced the dash cluster bulb.

Has anyone had an issue with the ABS light after changing dash cluster bulbs?

Does the ABS light work the same as the other CEL, meaning mileage based activation?

Anyone at all ... I keep asking questions and getting crickets
 
OK ... so I've followed these directions and have questions.

Jumper Tc to E1.
Key on.
Press brake pedal 8 times within the first 3 seconds.
Check the warning light shows the normal code [assuming they mean flash every half second here].
Remove the jumper.
Check that the warning light goes off.
[assume key off here]


I jumped the E1-Tc and the cruise light and such began blinking when I hit the brakes and my ABS light blinks, just not every half second (like the cruise light). It's more like once per second. Then the light goes out. When I start the truck, the light is back on. Do I need to remove the jumper while the light is flashing and/or truck running or turn truck off and remove the jumper?

This would me step 2:

When the light comes back on, you will likely want to pull the codes.
For that:
Remove the flat little metal jumper from the DLC plug. Don't drop it. Put it someplace really safe.
Install jumper Tc to E1.
Key on.
Count flashes.
Example: 2 3 would be two flashes, 1.5 second pause, three flashes, 4 second pause, then two - three again and again. Or it might show an additional code and then repeat.
If flashing rapidly without any pauses, it doesn't have a code stored.
Key off, one jumper in, other out, and you're good. Unless you drop that jumper!

What/where is the DLC Plug? The WA - WB is the only thing I see jumped where the E1-Tc is located.
 

Is this the "little metal jumper" that needs to be removed to pull the codes?
 
After another day of crickets I just kept trying things ... pulled code 48 today for the ABS. Forum search shows its related to CDL switch which I don't have. Only 2 real threads about it and no answers at all.

Has anyone figured out how to clear this or what the issue was? I still think this came on after I swapped the dash lights, but can't say for sure.
 
Back
Top Bottom