LX Radio Install.....

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Dec 8, 2013
Threads
282
Messages
1,476
Location
North GA
image.webp
Been reading and reading, and from what I can tell I'm going to bypass the amp and run straight to the radio from the aftermarket harness connected to the two grey connections that used to be plugged into the amp. I'm picking up 18G wire tomorrow to cover the length from the amp harness to the HU.

In the pic you see the two harness pieces that will connect to the two grey connections removed from the amp. I will run 18G wire from each wire to connect to the wires coming off the back of the HU. That should be all there is to it.....is that right??

Excuse my explanation, I've been trying to make heads or tails of this.
 
Just did this in my LX on Christmas. You have it 100% correct. Super easy!
 
The antenna power wire is harness that was attached to the stock, not the one to the amp. I can't recall which wire it is off the top of my head. You would need to either purchase the other harness adapter and connect the one wire or just splice into it.
 
image.webp
Installed today and it's good to go! Worst part was creating the extra length on the harness; not difficult just time consuming.
 
Yep, I remember the bundle of wires on my workbench extending the harness. I'm afraid of wiring and that was about as much as I am willing to tackle :o In reality, it wasn't hard at all, but my antenna is now MIA.
 
I hear ya...electrical isn't really my thing either, but after hearing my radio guy wanted $80 to install I decided to tackle it.

Some of the write ups are a little confusing in my opinion; so for anyone doing this simply ditch the amp and tweeter, attach the new harness to the two grey connections off the old amp, and run color to color to your new aftermarket radio.

Reassemble :beer:
 
WW..by any chance do you know what wire harness you used? and did you figure out the antenna thing? You're right about a lot of these install threads being confusing. so thanks for posting this up that's direct and to the point w/o the clutter.
 
Back
Top Bottom