Lubricate foam core shocks?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
May 7, 2016
Threads
176
Messages
939
Location
Decatur GA
I have a squeak that is driving me crazy. I think it is one of my Trojan foam core shock absorbers. I wanted to see if anyone could tell me if it was a bad idea to shoot some lubricant up the shock? If not a petroleum product, then maybe graphite or something? Although I don't see how I would get it in there. Not sure if that is the problem yet though. I am just shooting all possible areas right now.
 
Foam core shock absorbers?!
 
Yes, but I don't know what I was smoking when I posted this. They are Ironman Foam Cell.
 
You should ask the Trojan man about shooting in some lubricant to help with the noise....

You mean shooting some lube up into the cavity, behind the bell housing? That won't do much, since there's a seal that would stop it from going anywhere. Maybe you got a rock or something stuck up inside the cavity?
 
Possible. I can jack up the wheel and lift with a pry bar to get it to squeak. But I am still not certain where exactly it is coming from. I will check for rocks. But there is no noise when I turn it so I doubt it.
 
Possible. I can jack up the wheel and lift with a pry bar to get it to squeak. But I am still not certain where exactly it is coming from. I will check for rocks. But there is no noise when I turn it so I doubt it.
They have that plastic/poly body cover on them. That might be off-center and rubbing against the metal body, causing a squeak perhaps.
 
Is this a rear shock? Both? All?

Got that and I think it's one rear shock, the left side one. On the other hand, I'm not certain it's the shock or something else (bushing or whatever) . The shocks bear replacing, so going to do that anyway, but not certain that will solve the noise.
 
They have that plastic/poly body cover on them. That might be off-center and rubbing against the metal body, causing a squeak perhaps.
The off center body cover is a good idea. I might shove some foam rubber up there and drive around for a minute and see if that does anything.

It is the front right shock.
 
Yeah that was my first thought too. I was really hoping that's what it was.
 
If he shocks are really squeaking then the easiest fix is to replace it. shocks below certain price point will not be serviceable at all.
 
If he shocks are really squeaking then the easiest fix is to replace it. shocks below certain price point will not be serviceable at all.

Exactly what I have in mind. The grommets are loose on my squeaky shock, but the nut is frozen. No way I'm taking it apart without putting new shocks on. Eight years is a good run for a set of shocks.
 
Back
Top Bottom