Louisiana/Area For Sale/Wanted:

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

post up some better pics when you get it home
 
Louisiana Sportsman Magazine, Louisiana Fishing and Hunting


p1231544792760527.jpg
 
anyone have a extra free set of rear leafs i can have, mine are shot. im almost riding on my bumpstops. but i really dont have any money to replace them right now.
 
cajun65 said:
Cool buddy, I appreciate that. Those will be too big though.
Click to expand...

Marty,

Davis outgrew his 12" huffy bike and we got him a 16" bike, you can have the tires off of the bike if they will be small enough!
 
muddog said:
anybody have an old dana 60 laying around by any chance
Click to expand...

Are you familiar with the Louisiana 4x4 club? They have a forum with a 'for sale' area, mostly jeep but they have other stuff too. One of their members let me know about that fj40 that was at the port allen yard a year or so ago (long time gone, now)
Louisiana Off-Roader's Forum -> For Sale

* edit: looks like front d60 housing, passenger drop is still available $450. You could build it up as you want, I guess?
Axles For Sale - Louisiana Off-Roader's Forum

There is a yard in Zachary that I will be checking out soon, I'll let you guys know if I see anything interesting.
 
Last edited:
LaOutbackTrail said:
Unfortunately, I was just forced to resign from my job. I am looking to sell my 1978 FJ40 project that didnt even get really started.

The body is in OK shape, but has rust. I have removed most of the rust and primed, with the intention of repairing the holes. The rust is in the typical spots. Frame is in excellent shape.

Motor. The motor threw a rode, shortly before I bought it. The owner used the vehicle as his daily driver until it broke down, not even 6 months ago. I have a replacement motor that is included in the sale.

P5260241.jpg


You can see the rust spots that have been worked on. Some bondo has been applied to pitted, but not rusted through areas.

The vehicle was almost entirely stock and all parts are included as well as the additional parts purchased for upgrading/replacement.

I am asking $2600 which is less than what I have invested in the vehicle.

Email me, glowingreen01nf@aol.com or call 318-794-3362

Cruiser is located near Alexandria, Louisiana.
Click to expand...



Someone come get this thing from me for $2000 OBO!!!!!!!!!!!!!
 
2F Engine w/ low miles and misc parts...

Scott,

I am doing a V8 Conversion on my FJ. I am interested in selling the 2Fengine with transmission to include the following:

- Radiator(Repaired and tested this past year at Fred’s Radiator

-Weber Carb.

-Headers w/ new exhaust system

-Power Steering pump bracket for 2F

-Electronic Ignition(DUI Brand)

-Other Misc. parts that came off due to V-8 Conversion.

-Waterpump

-alternator



Note: All of the above have less than 500 miles on the parts. The engine had approximately 59,000 original miles on it.





Please let me know if you know anyone interested, they are taking up room in my shop and I’m sure I can make someone a good deal!



Thanks,



Stephen Luke

Owner

Automated Production LLC


Email: saluke@cox-internet.com


Scott,

I know your busy, hope this doesn’t take up to much of your time. I will let all the stuff listed go for $800.00. I feel like it would be a good deal given everything is in real good shape. The engine mileage is correct. The engine smoked a little when you would let off the pedal. I think it was due to a ring sticking on one to the cylinders. I removed the head and the inspected the cylinders and their were know marks on the cylinder walls. The compression was a little low on one cylinder so that’s what leads me to believe it had a stuck ring.

As far as the v-8 conversion goes, I had to have the V-8 sound and horsepower. I am installing a 2005 Vortec 5.3 liter fuel injected with aluminum heads and block. I’m also converting to a automatic transmission(4L65E) 4 speed automatic. I’m retaining the stock Transfer case. All I can say is I’m a sucker for the horsepower and sound! Plus the project itself is kind of fun for me! Stop by a check it out when you have time.



Thanks,



Stephen Luke
 
PScottBx said:
Scott,

I am doing a V8 Conversion on my FJ. I am interested in selling the 2Fengine with transmission to include the following:

- Radiator(Repaired and tested this past year at Fred’s Radiator

-Weber Carb.

-Headers w/ new exhaust system

-Power Steering pump bracket for 2F

-Electronic Ignition(DUI Brand)

-Other Misc. parts that came off due to V-8 Conversion.

-Waterpump

-alternator



Note: All of the above have less than 500 miles on the parts. The engine had approximately 59,000 original miles on it.





Please let me know if you know anyone interested, they are taking up room in my shop and I’m sure I can make someone a good deal!



Thanks,



Stephen Luke

Owner

Automated Production LLC


Email: saluke@cox-internet.com


Scott,

I know your busy, hope this doesn’t take up to much of your time. I will let all the stuff listed go for $800.00. I feel like it would be a good deal given everything is in real good shape. The engine mileage is correct. The engine smoked a little when you would let off the pedal. I think it was due to a ring sticking on one to the cylinders. I removed the head and the inspected the cylinders and their were know marks on the cylinder walls. The compression was a little low on one cylinder so that’s what leads me to believe it had a stuck ring.

As far as the v-8 conversion goes, I had to have the V-8 sound and horsepower. I am installing a 2005 Vortec 5.3 liter fuel injected with aluminum heads and block. I’m also converting to a automatic transmission(4L65E) 4 speed automatic. I’m retaining the stock Transfer case. All I can say is I’m a sucker for the horsepower and sound! Plus the project itself is kind of fun for me! Stop by a check it out when you have time.



Thanks,



Stephen Luke
Click to expand...


Damn now I'm thinking :hhmm: need to see what he's doing with the tranny and t-case too. Dad needs a few things and could build it on a stand for a spare you never know when a cruiser in need may show up and pickup is just down the road.
 
I have his phone number if you need it/ want it
me
 
Stephen said:
......

As far as the v-8 conversion goes, I had to have the V-8 sound and horsepower. I am installing a 2005 Vortec 5.3 liter fuel injected with aluminum heads and block. I’m also converting to a automatic transmission(4L65E) 4 speed automatic. I’m retaining the stock Transfer case. All I can say is I’m a sucker for the horsepower and sound! Plus the project itself is kind of fun for me! Stop by a check it out when you have time.



Thanks,



Stephen Luke
Click to expand...

Sounds like this is going to be a great cruiser, hope to get to see it sometime :cool:
 
FYI

have a 25% discount on PIT BULL tires won at SCC exp 03 /31/09 have new shoes so don`t need if interested let me know:steer:
 
You must log in or register to reply here.

Share this page

Back
Top Bottom