- Location
- United States
Going through the garage and want to get rid of some stuff! Most of this will be pick up only but you will probably find the price is right.
First up - FJ60/62 shackle take offs and a set of brand new Joint Fuji pins with bushings. $80 plus ship or pick up in LA.
1971-1974 FJ40 clutch slave. Needs a rebuild. $40 plus ship.
F / 2F / 3FE oil pan. This is in good shape. $60 plus ship.
SOR Front Bumper for FJ40. This is NOS but has a few scuffs from storage. Newspaper packing in it dated to 1993. Heavy duty. $80 picked up.
F oil pump. $40 plus ship (I should have brushed off the dirt first, sorry about that)
F engine shift fork complete with pivot ball. $30 plus ship.
F / 2F flywheel covers. $40 for the pair plus ship.
NOS leaf spring helpers. These are pretty cool. $60 plus ship but they are heavy.
Other items free for pickup:
- 1972 bottom end (block / crank / pistons / oil pan) needs machine shop work but a good core - I have an engine hoist to get it into your truck to take away
- 3 finger flywheel - needs resurfacing but is fine
- 1968 head - will need machine shop work but a good core
- F camshaft with drive gear - will need reconditioning
- 3 speed transmission, 1st gear looks fine, reverse idler needs replacing
- FJ62 driver's side rear axle shaft. Light scoring on the bearing race but it was fine in the rig.
First up - FJ60/62 shackle take offs and a set of brand new Joint Fuji pins with bushings. $80 plus ship or pick up in LA.
1971-1974 FJ40 clutch slave. Needs a rebuild. $40 plus ship.
F / 2F / 3FE oil pan. This is in good shape. $60 plus ship.
SOR Front Bumper for FJ40. This is NOS but has a few scuffs from storage. Newspaper packing in it dated to 1993. Heavy duty. $80 picked up.
F oil pump. $40 plus ship (I should have brushed off the dirt first, sorry about that)
F engine shift fork complete with pivot ball. $30 plus ship.
F / 2F flywheel covers. $40 for the pair plus ship.
NOS leaf spring helpers. These are pretty cool. $60 plus ship but they are heavy.
Other items free for pickup:
- 1972 bottom end (block / crank / pistons / oil pan) needs machine shop work but a good core - I have an engine hoist to get it into your truck to take away
- 3 finger flywheel - needs resurfacing but is fine
- 1968 head - will need machine shop work but a good core
- F camshaft with drive gear - will need reconditioning
- 3 speed transmission, 1st gear looks fine, reverse idler needs replacing
- FJ62 driver's side rear axle shaft. Light scoring on the bearing race but it was fine in the rig.
Last edited: