looking for cargo and door panel files .dxf .ai .eps .svg

[cruiserpilot]

I found a local cnc operator. My rear cargo panels are pretty ratty old wood things. I've remade the rear deck with plywood
for leaping dogs to land on. Wondered if anyone has files I can get. I'm looking for '84 60 4 doors and cargo. Also '88 BJ74
4 doors and cargo. 60 is 2 front doors, 2 pass doors and 2 cargo side panels. Rear deck if you have anything I could upgrade then.
BJ74 is 2 front doors, 2 rear facing doors and 2 cargo panels.
They have nice 1/8" ABS with a carbon fiber finish, looks cool and would be strong enough to mount speakers.
I'd take any advice on fasteners ideas to match all the mounting holes.

 

[duncanrm]

Someone posted these a while back and I cant for the life of me remember who.. so I'm sorry I'm not crediting you..

Cargo Panels - Google Drive

drive.google.com

 

[cruiserpilot]

I got that, don't have google drive. It is 5 pcs though. Have to figure it out

 

[georgebj60]

Someone posted these a while back and I cant for the life of me remember who.. so I'm sorry I'm not crediting you..

Cargo Panels - Google Drive

drive.google.com

These are my files, now sent along to @cruiserpilot. When I’m back at my laptop I’ll post the updated files here. Same geometry, but cleaned up and combined into one DXF file.

UPDATE: 22/11/25
Revised rear cargo files attached here.

 

[georgebj60]

Unfortunately I never did digitize the door panels but I’ve had lots of people wanting them. If I ever get a chance to do them I’ll make sure to post them up.
As for fasteners, maybe check out Dzus fasteners. Same thing they use for motorcycle fairings.

 

[SEAFJ62]

These are my files, now sent along to @cruiserpilot. When I’m back at my laptop I’ll post the updated files here. Same geometry, but cleaned up and combined into one DXF file.

UPDATE: 22/11/25
Revised rear cargo files attached here.

Do you happen to have them with the rear speaker cutouts for the FJ62?