Looked but couldn't find... Wheel Cyl Thread direction

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Nov 24, 2006
Threads
45
Messages
339
Which wheel cylindars have the left handed threads for the adjustment?

I'm not stupid I just received this job in many boxes and don't have any literature on it. It's an '65 FJ40....

I got it with the rear's already on and I think they're wrong too... Both adjusters are pointing down...

Another thing, the front brakes that came with it are the same Raybestos # as the rears, is this correct?

I've searched a lot of builds on this site but none of the pictures or writings let on to which was which....

Thanks!
 
FJ40Orig......

I've got to do some thinking on this; and I've had too many beers too do u justice. Let me pull my old books:
Namely:
FSM No. 97216 Pg 7-16 &
FSM No. 98154 (also 94154E) &
FSM No. 98077

I'll do some study on this and see what happens.

Mem at this time indicates there is no left hand thread system; although my brain database has frickt up before.

Without FSM No. 97216 u can be come confused; based on the notes I wrote to myself in the 1970's.

...
 
the screw in adjuster's are left handed on two of the cyl's I believe... I may be just too damn tired to try and figure it all out by braille... I should have gotten a book or two but I'm not getting paid enough to go that far...

FJ-40Original
 
So 65's are different from the 69-up when it comes to brake wheel cylinders? :confused: Did not know that! I knew the masters were different...

If you have left hand adjusters then maybe they were upgraded? If that's the case then the cylinders should be marked with a L or a R indicating Left or right cylinder. The rears are dual piston the fronts are single. All shoes are the same. See pics for how they are mounted.
P1080002W.webp
P2120005W.webp
 
Fuzzy....

I have no Idea who the berjeezus you are but I LOVE you!
That link and the post above yours are PERFECT! Thanks for this! I think the rears are screwed up... All the adjusters are pointed down so it looks like I wait another FRIGGIN WEEK! For correct parts...
I'll update tomorrow and I'll have pics this time by god! You feller's and fella's deserve some for the help you've rendered!

Gary
P.S. What meta tag's do I use to incert pictures? [ and ] or < and > or { and }
 
One last thing... Again..... The adjuster side of the replacement cyl's that came with the BUT are too small to hold the fat side of the brake shoe... I had to use the old adjusters. Does that mean I haev incorrect shoes or incorrect wheel cylinders?
 
One last thing... Again..... The adjuster side of the replacement cyl's that came with the BUT are too small to hold the fat side of the brake shoe... I had to use the old adjusters. Does that mean I have incorrect shoes or incorrect wheel cylinders?

No, that's a common problem with replacment brake parts. As long as the old adjusters work you are good. Make SURE to use lots of antisieze on the adjusters! Keeps them free for the later adjustments you will be making!
 
I don't have any manuals with me to advise which adjuster thread direction goes to which side, but I guarantee you want the cylinders arranged so when you put the brake adjusting tool into the slot in the backing plate, the tool (your hand) moves towards the tire (away from the axle) to expand the shoes out closer to the drum.
 
LAst brake question.....

What's with the damnable angle to the adjusting screw on the wheel cylindar?:mad:

Which direction does the angle go, sloping t'wards the longer side of the shoe or t'wards the outside?

After this I can put the damn wheels on!:cool:
 
FJ40Orig....

A note here from manual #98077:

"There are two kinds of adjusting nuts and the bolts. The adjusting bolt of the left-hand threads is on the right side of the rear brake, and the right-hand threads bolt is on the left side of the rear brake."


Hope that helps a little..

...
 
Thanks Igotta! I think that's how I put them in. the rears didn't have them....

I'm on to the brake plumbing tonight then setting the engine on it tomorrow.

THen calling the owner and telling him to come get the damnable thing... :)
 
Back
Top Bottom