FJ60 on 39" BFG Krawlers.
Had to set the air pressure to 7psi to get out of the garage.
Had to set the air pressure to 7psi to get out of the garage.
Look what made it out of the garage.
- Thread starter PPFJ60
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Joined
- Sep 19, 2007
- Threads
- 145
- Messages
- 1,531
- Location
- Colo Spgs Colorado
- Website
- www.redlinelandcruisers.com
looks awsome! congrats
- Joined
- Jun 28, 2002
- Threads
- 165
- Messages
- 2,105
- Location
- Colorado Springs, CO
- Website
- www.mntoyx4.com
Awesome Chuck.
- Thread starter
- #4
With the ebrake on the back of the transfer case and a cross member with skid plate also covering that area and pinion protection on the axle it makes what used to be and easy job of installing a drive shaft in to a pain in the butt job.
10oz of airsoft pellets seems to do a nice job of balancing the tires. The 39" BFG Krawlers are surprisingly quiet on the road comparatively speaking of course.
10oz of airsoft pellets seems to do a nice job of balancing the tires. The 39" BFG Krawlers are surprisingly quiet on the road comparatively speaking of course.
Starting to get that "monster truck" feeling...."in the mega arena this Sunday, Sunday, Sunday!!!"
Chuck didn't backup to get out of that parking space...he just role over that little white car...I need some
so I can watch the show. 
Chuck didn't backup to get out of that parking space...he just role over that little white car...I need some
so I can watch the show. 
I want pictures of it running over a Prius. What engine/gears are in that beast?
- Thread starter
- #10
It has a 383 stroker motor withh 4.88 gears.
I did a little flexing of the suspension yesterday. The rear seems to be just fine with a little fender clearance when the bump stops hit. The front is a different story. I will need to cut the front fenders all the way around.
I did a little flexing of the suspension yesterday. The rear seems to be just fine with a little fender clearance when the bump stops hit. The front is a different story. I will need to cut the front fenders all the way around.