Locking front axle w/engine off

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 31, 2017
Threads
1
Messages
15
Location
Alaska
Going to start rebuilding the front axle tomorrow in my ‘97. The 80 is currently not running since I’m waiting on oil pump case screws before getting it back running again (ordered these as NO one had these locally).

I’ve read that the front should be locked prior to rebuild. Can I lock this without the engine running?
 
With the key on and electrical system working, yes.
 
Love the lawn dart
 
I've spent time looking in my 1994 FSM for where it says you have to lock the diff locks before you remove the axles. The thing is, the only jobs I've found that says you need to lock the diff lockers for, is to remove the front, or rear axle differential carrier. So I've got a question, can someone show me where it says in the FSM, that you need to lock the diff locks, before you remove the axles?
 
I can't, but the reason you lock them is so the locking collar stays in the right place when you remove the axle. It's not required, I've pulled the axles without locking it without issue, other people have done it with bad results. Whether or not it's in the FSM, it's dumb not to.
 
I can't, but the reason you lock them is so the locking collar stays in the right place when you remove the axle. It's not required, I've pulled the axles without locking it without issue, other people have done it with bad results. Whether or not it's in the FSM, it's dumb not to.
So this is one of those extra steps the tech's in the service department came up with, to keep from having problems when they put the axles back in. I wonder if that extra step was ever included in any service bulletins?
 
So this is one of those extra steps the tech's in the service department came up with, to keep from having problems when they put the axles back in. I wonder if that extra step was ever included in any service bulletins?
For all I know it may be in the FSM, I'm just not going to look for it. :flipoff2:
 
You don't have to lock the front the rear yes but not front.
That's entirely possible, I just focused on the 'Can I?' and didn't bother with trying to remember which axle needs to be locked.
 
Ok it’s locked in case it needs to be. Jacking up the front and rotating the tires a little did the trick. Thanks!
 
Back
Top Bottom