lined my 80 again

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

I hate to break it to you, but herculiner and Durabak are the same product marketed under different names. Both are manufactured by Cote-L in NJ.

Yours does look a lot smoother than mine though(grey durabak on mine).
 
I did my flares and bottom section of my truck about a year ago. Some sections of my flares look like the picture above your grille, like it wore off. I have heard people spray with black rattlecan and it looks better. I used Hurculiner on my truck. I rolled it on and did 1 thin coat first, 1 thick coat later in the day, and 1 thick coat the next day.

I added a little to my original post to answer some questions that people had.
 
Arya Ebrahimi: figures well either way I now have the uv protectant stuff and I am much happier with the finish... so if herc is durabak is it just lucky that I got a better finish? (less abrasive) more uniform chunk size? I would also guess that herc is the regular durabak not the uv stuff based off its 89$ price vs the 119$ for the durabak-18.?.?

Sno bored: thanks
 
I've been through a few gallons of Herc and the Durabak is more consistent. Even if it's chemically made up the same the particles are absolutely diffrent. Peak may be repackaging the same thing but the consistency is diffrent by the time it is sold as Herculiner.
 
This is why I am afraid to line my truck. It looks like sh*t. I am glad you like it, and I am sure it suits your needs. Maybe its just be the contrast of the black against the silver, because Beno's truck isn't as appalling.


When I did my truck, I used Duplicolor which is a very smooth finish (no chunks at all like how the OP's turned out).




Even my mom (who called me crazy when I told her what I was going to do) really liked the way it turned out, and was very impressed with it.
 
Herculiner and Durabak are exactly the same stuff (Herculiner is sold in stores, Durabak is only sold on-line). Keep in mind this stuff has a short shelf life and is time dated. I'm guessing the difference in outcome is biased on the Durabak being fresher. Durabak is shipped directly from the factory in NJ to your house. The Herculiner could be sitting on the shelf for months before you buy it.
 
Geez, some of you are tough on him. I think it looks fine and this is coming from a bone stock, LX450 driver! Don't start out by saying something along the lines of "to each his own" and then rip him for what he's done to his rig -- you just proved that you don't believe in the "to each his own" principle. The silver over liner look is unique and definitely not something everyone could live with, but linered trucks are on the extreme end of the styling spectrum anyway. They are radical, polarizing... you either like them or you don't.

It's not like he's put 20" rims on it and pimped it out. The liner body is awesome for protection against scratches. In this sense it is a practical 4x4ing mod; shouldn't offroaders at least admire that aspect of his rig?

As a former driver of a "head turner," I can totally relate to the good feeling you get driving it around. It's awesome having people come up to you in a parking lot to ask questions, talk to you at stoplights with the windows down or just give you a thumbs up every time you go out for a spin.
 
Geez, some of you are tough on him. I think it looks fine and this is coming from a bone stock, LX450 driver! Don't start out by saying something along the lines of "to each his own" and then rip him for what he's done to his rig -- you just proved that you don't believe in the "to each his own" principle.


Most people who line their rigs aren't going for "looks". Well, they might be going for looks, but the same way that wearing 10 lb's of metal on your face is going for looks. :lol:


Most bedlined trucks I've seen in person do look like crap. Partially that's because most bedlining materials are very rough (look at how large the granuales are in the material the OP used), and partially because...well...it's not paint.

It's extremely functional, and works well for what it's intended for. But I doubt anyone's going to call it pretty.


There are a couple of more moderate options if you want something that looks decent and is still functional. I've found Duplicolor to be one, and there are others out there. They still only look decent however.


As I said before anyone who's doing this (and especially to the level that the OP did, with most of the doors covered) knows that (or should) going in.



Don't start out by saying something along the lines of "to each his own" and then rip him for what he's done to his rig -- you just proved that you don't believe in the "to each his own" principle.

Funny how someone who's (supposedly) defending the "to each his own" principle is ragging on someone who chooses to express their own opinion.
 
Ebag333: I figured I would never get a smooth enough surface finish for my liking so I went with textured yours looks nice

Newps: thanks for the input


aclos3:aw come on man the 20s are next :hillbilly: nah but seriously you cant do something like this to your truck and expect no one to think it looks horrible... thanks


however if anyone who thinks it looks like sh*t wants to throw down for me to get it professionally done by all means please do or maybe a new body or at least doors then I could use paint and it wouldn't hurt the eyes so much... with all the holes from sh*tty body work it would have taken gallons of bondo to make the lines look ok. I hate bondo and will not use it... this cruiser has no choice but liner (which covers bad body work very well) plus my total cost with the grinding is about 450$ I cant paint for that
looks dont mean near as much as mechanical
 
Geez, some of you are tough on him. I think it looks fine and this is coming from a bone stock, LX450 driver! Don't start out by saying something along the lines of "to each his own" and then rip him for what he's done to his rig -- you just proved that you don't believe in the "to each his own" principle. The silver over liner look is unique and definitely not something everyone could live with, but linered trucks are on the extreme end of the styling spectrum anyway. They are radical, polarizing... you either like them or you don't.


Maybe my preface was not clear enough, but I was stating the fact that I do not like it. I was not in anyway trying to influence MO627 (a little late for that anyway) I was simply providing my point of veiw. And given the OP's response to my post I do not believe that I offended him, how you ended up offended I am unsure.
 
Last edited:
oh man why didnt someone tell me that bedliner isnt for looks i totally F'ed this project up. I think it looks a lot better than this pic below (domestic vehicle alert) or maybe the hotdog stand yellow xterra with red trim and grill guard running around town, but Ebag333 is correct it takes a spot of a crooked mind to think this looks good... I was not going for a show quality look. I would have expected the same comments had I painted the cruiser with a big rainbow.
Photo_110308_003.webp
 
Maybe my preface was not clear enough, but I was stating the fact that I do not like it. I was not in anyway trying to influence MO627 (a little late for that anyway) I was simply providing my point of veiw. And given the OP's response to my post I do not believe that I offended him, how you ended up offended I am unsure.

Yes I understood you clear as mud. I dont think yours or any other comments are out of line. Not a single person is going to offend me we are all entitled to our opinions. I get to drive this prize pig with pearls and I love it
 
Ebag333: I figured I would never get a smooth enough surface finish for my liking so I went with textured yours looks nice

Duplicolor was the smoothest I could find, and it's still not what I would consider "smooth".

I've considered lightly sanding it then painting over it...but....I'm far too lazy for that. Plus that'd kinda defeat the purpose of bedlining it in the first place. :hillbilly:



One advantage towards going the rougher texture (or brighter colors :grinpimp: ) is that you'll get lots of looks/comments. People will always talk about "that bright orange rig" or "the one that looks like an avocado". Less so about "that mall cruiser that has color matched bedliner".

In a way I regret going with the plain Duplicolor. I may have to steal an idea posted and bedline the interior of my LX red, and call it watermelon. :idea:

Subtle on the outside, garish on the inside. :hillbilly:
 
Personally, I like a lined truck--inside and out.

It might look like s*** for those who worry about aesthetics, but those who line trucks generally are not interested in aesthetics--philosophical or practical.

Mine is starting to show similar signs of stretching and de-coating, as I like to put it. But it's been on there for 2 years now, and I've beat the crap out of it for two years. Not bad for a $200 or investment.

I'm going to reline the sucker as well this spring right over the old stuff there now.

To each his own...

Nice job with the TEQ stickies....cool idea.

-o-
 
Personally, I like a lined truck--inside and out.

It might look like s*** for those who worry about aesthetics, but those who line trucks generally are not interested in aesthetics--philosophical or practical.

Mine is starting to show similar signs of stretching and de-coating, as I like to put it. But it's been on there for 2 years now, and I've beat the crap out of it for two years. Not bad for a $200 or investment.

I'm going to reline the sucker as well this spring right over the old stuff there now.

To each his own...

Nice job with the TEQ stickies....cool idea.

-o-

Maybe the whole looking like s*** thing is a school of though that cars and trucks need to be clean shiny and smooth. thank you i like the way the blisters turned out... I lost one of my 40's so regretfully I did not line in the 40's maybe next time the dash is apart i will find the other and line em on
 
Back
Top Bottom