lift kit

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

thanks have checked both of those, just wondering if i was missing a good deal.
 
Kurt = nice guy

Don't forget Kurt at Cruiser Outfitters. He is a real nice guy, friendly and helpful. So many retailers are kinda grumpy or flat on the phone, not my experience with him. :flipoff2:
 
Don't forget Kurt at Cruiser Outfitters. He is a real nice guy, friendly and helpful. So many retailers are kinda grumpy or flat on the phone, not my experience with him. :flipoff2:

x2 what he said. I've had the opportunity to meet Kurt in person a few times, he's one awesome dude and knows his cruisers. :D
 
X3, I will order as much as I can in the future from him. Great guy, answers your emails promptly, on the phone too, and sends your parts when he says he will.
 
looking for the best price on a lift kit. have checked search , no good info.

be careful when shopping for price. There are a lot of "kits" out there that don't address the changes to your truck properly or completely.

While OME supplies their caster bushings to all their kits they actually only fix the caster issue for their "no lift or stock height" springs. Using any other spring they offer and your caster will be low and the truck will feel it.

So I would decide what height you want and then educate yourself of what components you need to put the truck back to where it should be before looking for the best deal.

Once you go above 2.5" in lift the list of items and it's cost grows significantly.
 
be careful when shopping for price. There are a lot of "kits" out there that don't address the changes to your truck properly or completely.

While OME supplies their caster bushings to all their kits they actually only fix the caster issue for their "no lift or stock height" springs. Using any other spring they offer and your caster will be low and the truck will feel it.
Not true. The OME caster bushings correct for 3.3 degrees so they are the correct for a 2-2.5 inch lift. But any higher no.
 
Not true. The OME caster bushings correct for 3.3 degrees so they are the correct for a 2-2.5 inch lift. But any higher no.

Not at all. They only provide 2* of correction and that will only correct for a 1" lift.

This has been verified by many members who have taken the time to have an alignment done afterward.
 
Nope not according to Slee.
"When you measure the traditional "2 Degree" bushings from Old Man Emu, you will also see that they actually correct closer to 3.3 degrees. So they are still the correct adjustment for a 2"-2.5" lift."

Are you gonna doubt Christo?

And if he is totally off base then why is it in the FAQ for all the world to see as gospel? Huh?
 
Nope not according to Slee.
"When you measure the traditional "2 Degree" bushings from Old Man Emu, you will also see that they actually correct closer to 3.3 degrees. So they are still the correct adjustment for a 2"-2.5" lift."

Are you gonna doubt Christo?

And if he is totally off base then why is it in the FAQ for all the world to see as gospel? Huh?

I doubt everyone. And you will have to ask Christo why he put that up on his sight.
 
Not at all. They only provide 2* of correction and that will only correct for a 1" lift.

This has been verified by many members who have taken the time to have an alignment done afterward.

I'll have to agree with Landtank. I installed the 850/860 springs with the OME yellow caster bushings and my rig wandered all over the place. I replaced the bushings with Slee's blues and there was noticeable improvement. My alignment showed I am at minimum spec, still not as good as stock....as far as driving it goes but what do you expect when you lift your rig? :D

BTW, I purchased my lift from TRDparts4U and had a good experience.....great price!
 
I doubt everyone. And you will have to ask Christo why he put that up on his sight.
No it's on THIS SITE! Right in the FAQ about lifts page. If it is wrong then it should be corrected. Who we trying to fool here?
 
image-2736596-10463497
Tonneau Covers, Lift Kits, Winches, Leveling Kits, Tires, Wheels & Tonneau Cover Parts by 4 Wheel Parts does free shipping to any of their stores so they seem to be the cheapest for people with a store close by. They do not list the OME lift on their web page for some reason, but if you call them, they have it. They can also get any ARB/OME product at very competitive prices.

I have a 4 Wheel Parts store about 2 blocks from where I work. The best price they could give me was $220 more than what TRDparts4U quoted me.
 
I have a 4 Wheel Parts store about 2 blocks from where I work. The best price they could give me was $220 more than what TRDparts4U quoted me.

I called and priced out the OME lift with them about a month ago with the CC bushings and it was under $600, not sure what they quoted you, but this was the cheapest I had found at the time. To make things clear, everyone post up what you paid for your lift including taxes and shipping and where it came from. I'm also in the market and want to know what my best deal is.
 
850/860 springs, shocks, CC bushings, and steering stabilizer shipped to San Diego, CA for $802.00
 
Back
Top Bottom