Knuckles, knuckles, knuckles

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Dec 7, 2010
Threads
13
Messages
114
Hey there mud guys, I'm pulling the trigger on hell Fire fab knuckles because..... Well there amazing and my current setup is not handling my 38.5" swampers very well. Also I want to run hydro assist and my current setup isn't ideal for doing so. So Here's my question, has anyone running hell Fire fab knuckles had any issues, any things to watch for? Secondly would anyone be interested in my current setup? I'm running a Slee high steer arm on passenger side, with stock lower arms, tie rod on backside of axle. I'd be willing to make someone a good deal on my Slee arm, the knuckles, both lower arms, and drivers side trunion cap, and stock tie rod. Thanks.
 
I'm running the older generation made by Billy before RuffStuff took over. No complaints, these knuckles are awesome. I've seen the RuffStuff version in person and they're even better.

Not sure what you're setup is but I see you mentioned the tierod is still in the back. Is this going on an FJ80? Stock radius arms and panhard? If so, this won't work with high-steer having the tierod up front. It will interfere with the panhard and panhard bracket at the axle. It needs to be cut off and relocated.

My older Hellfires:

21642999294_2ddcdd051a_h.jpg
 
@jcardona1 these are going on fzj80 axles under a leaf sprung 60 series, so no issues with panhard bar, I just received my knuckles and there impressive. Beautiful 80 BTW! Any chance you know your tie rod length, center/center. Just trying to get a idea from someone who's already done this.

@inkpot as of right now that's what I'm doing, if later I want a custom housing to run the 9.5 diff I'll still be using the hell Fire knuckles. As it sits now though, I've got factory e-locker and big brakes, big birfs, all the things that make the 80 series axles awesome, just needed to do something about the steering. If the hp 8 inch gives me issues I'll look into a 9.5 setup. I don't do any super gnarly wheeling, mostly just screwing around in the woods, playing in the snow. Aswell as driving it around town to run errands. Plus I'm running a tired ish 2f so she isn't a axle snapping power house. The hellfire knuckles are the cleanest easiest way to give me a good stout steering system, I'm also putting a psc ram assist setup on to help move things, later a red top fj80 steering box as it appears to bolt right up to a 60 series frame.
 
Would it make more sense to just throw a Dana 44 or 60 up front instead mod something is a bit on the weak side?
 
you should just run the 60 series front axle with spacers or weld in some tube extenders to make it 3” wider. I’m not so sure larger 80 knuckles is a bigger advantage than a 9.5” front diff especially with 38s. I’m surprised you aren’t just blowing through those things.

Either way, post up some pics. I want to see those bad boys.
 
Well if you search mud for "2k cruiser" it'll give you a better understanding of what I'm dealing with. In a nut shell, bought a 2 thousand dollar cruiser sight unseen. Guy didn't really know what he had. Its a 85 with 96 fzj80 axles with e-lockers, full float rear, rear disks, 5:29 gears, Chev 63" rears, OME heavy front lift springs, Saginaw PS pump, tapped box, gm 1 wire alternator, working smittybilt winch. After I sorted the brakes out (4 new calipers and all pads), a new head from torfab (great guy) and a few other little doodads, I was up and running. So needless to say, I'm working with what I've got. I really like the 80 axle, although it appears a 60 would be better, this is what I got. If down the road I decide to switch axles, I will go with a custom housing and swap my hellfires right over, aswell as running a 9.5" center. But for today my #1 concern was addressing the crappy steering I had. Hence the hellfires. Plus let's face it, there pretty dang cool, and I applaud Billy for taking the initiative in making these. I've just got it mocked up, gotta clean the birfs and regrease, and I need to pick up tubing tomorrow for draglink/tierod, and I need to swap my pitman arm for the new one that I ordered since mine was drilled for hiems. I'm switching back to fj80 tre on everything. Here's pics of my old setup also.

1010171307.webp


1010171309.webp


1010171805.webp


1010171805a.webp


1010171805b.webp
 
It’s unique. Not many 60s out there have 80 series axles but no one can argue with the rear 80 FF. My bro has one and both 9.5” 80 elockers in his 62 which is an option if you decide to go with the lengthened 60 axle up front later down the line.

What can I say I would buy hellfires just to sit in my living room to look at them. They are sweet. But they should definitely be a little more safe than what it’s got going on now. Especially since all the steering business will be up high in front.
 
On and on, ruff stuff sent the wrong bungs for my tie rod/drag link and also ome of the knuckle studs was bent. They are sending me out the bungs and stud, kinda hit a wall I'm as far as I can go. Painted everything up, while I was painting the arms I decided to engrave the bearing part # and leave it unpainted (although it's clear coated), figure that help me later down the road and if I ever sell it the new owner will be able to order the proper bearings.

1011171901.webp


1012171001.webp
 
Back
Top Bottom