just bought a used 80....

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 7, 2009
Threads
6
Messages
78
Location
Maui, HI
hey all... im fairly new here.. and just purchased a 94 LC-locked... and is very excited to get to the trails... but before any mods there are some minor things i have to fix... the body has some rust spots on the top of the windshield where the seal is... and at the passenger rear sliding window... also i didnt notice untill after i purchased that the e-brake doesnt grab or isnt working... other than that i guess things are fine "hopefully".. but anyways... is any one have experience with the e brake? not locking?....thanks in advance...

1994 LC-locked 129xxx miles.. white=sweet!!:cheers:
 
It's not uncommon for the e-brake to rust and seize. Get the FSM and it will walk you through how to service it. I suggest you also search for threads here on MUD. When you're ready to order parts, contact cruiserdan and be sure to mention MUD.
 
I believe there may be a thread in the faq which addresses the e-brake, it is a common repair in the rust prone areas of the country. FAQ can be located as one of the sticky threads at the top of the 80 series forum. It would be helpful if you put your location in your profile. Welcome to MUD.
 
yah in in long beach, ca by the way... im the third owner and the first owner lived in santa monica near the pier... so im guessing thats why it has those mini rust stains... but thanks guys... ill be sure to check out those threads...
 
I just unseized mine. Again.
You can buy the parts of the ebrake and call it a "kit" by calling CDan. You will find his number here on the site. But if want to just get them loose and they may still be in good shape, pull the rear tires off and be hind each rear rotor is a rubber boot. Pull off the boot and use brake cleaner on the bracket inside. Your gonna have to pull easy on the handle and tap the ebrake cable ends to move it I'm sure.
You should be able to move the bracket by hand when your done.
If you don't get it the bracket to free up real good, you will experience what feels like a tire going flat your next trip out with it.
 
ohh nice!! ill try that... ill also look for cruiserdan's number... thanks.. ill update asap...
 
MUD to the rescue - the Faqs and search make everything better!

Congrats on your LOCKED rig :cheers:

and :flipoff2: welcome to the madness ~
 
hey all... im fairly new here.. and just purchased a 94 LC-locked... and is very excited to get to the trails... but before any mods there are some minor things i have to fix... the body has some rust spots on the top of the windshield where the seal is... and at the passenger rear sliding window... also i didnt notice untill after i purchased that the e-brake doesnt grab or isnt working... other than that i guess things are fine "hopefully".. but anyways... is any one have experience with the e brake? not locking?....thanks in advance...

1994 LC-locked 129xxx miles.. white=sweet!!:cheers:

Your brake may just be so loose that the shoes aren't contacting the rotor correctly. Mine was like that. It's an easier fix to take off the wheels and manually advance the shoes so they contact the rotors--start with that before you tear too much apart.
 
ralphy that makes sense.. because before i bought it the guy told me he replaced the rotors and wheel bearings...
 
Ya, but those have nothing to do with the ebrake. A separate system. I'm pretty sure he would have mentioned he replaced ebrake parts. They aint an "easy" 5 min. job.
 
Ya, but those have nothing to do with the ebrake. A separate system. I'm pretty sure he would have mentioned he replaced ebrake parts. They aint an "easy" 5 min. job.

Actually, when you replace the rear rotors, you have to adjust the ebrake to the new rotor. In fact, you usually have to back off (loosen) the ebrake adjustment to get the old rotor off, and then adjust it to fit the new rotor. If that wasn't done right, it could be part of the problem. You only have to remove the wheel to get to the adjuster.
 
Hmm, I didn't get that far. Just pulled off the wheels. I know now, the best way is to replace the parts from the cable ends to the ebrake itself. My ebrake is starting to hang up, again!
I'm adding it to my list to ready the truck for snow.
 
Back
Top Bottom